Mouse Cell Cycle ELISA Kits
Mouse CCND1 (Cyclin-D1) CLIA Kit (MOES00212)
- SKU:
- MOES00212
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 18.75pg/mL
- Range:
- 31.25-2000pg/mL
- ELISA Type:
- Sandwich
- Reactivity:
- Mouse
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cell Cycle
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Mouse |
| Detection method: | Chemiluminescence |
| Detection range: | 31.25-2000 pg/mL |
| Sensitivity: | 18.75 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Mouse CCND1 in samples. No significant cross-reactivity or interference between Mouse CCND1 and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Mouse CCND1. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Mouse CCND1 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Mouse CCND1, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Mouse CCND1. The concentration of Mouse CCND1 in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | CCND1: a member of the highly conserved cyclin family, whose members are characterized by a dramatic periodicity in protein abundance through the cell cycle. Cyclins function as regulators of CDK kinases. Forms a complex with and functions as a regulatory subunit of CDK4 or CDK6, whose activity is required for cell cycle G1/S transition. This protein has been shown to interact with tumor suppressor protein Rb and the expression of this gene is regulated positively by Rb. |
| UniProt Protein Details: | Protein type:Nuclear receptor co-regulator; Activator; Cell cycle regulation; Oncoprotein Cellular Component: nucleoplasm; tight junction; membrane; transcriptional repressor complex; cytoplasm; cyclin-dependent protein kinase holoenzyme complex; intracellular; nucleus Molecular Function:protein binding; enzyme binding; histone deacetylase binding; protein complex binding; kinase activity; cyclin-dependent protein kinase regulator activity; transcription corepressor activity; transcription factor binding; protein kinase binding; protein kinase activity Biological Process: lactation; fat cell differentiation; G1 DNA damage checkpoint; negative regulation of Wnt receptor signaling pathway; re-entry into mitotic cell cycle; positive regulation of cyclin-dependent protein kinase activity; regulation of cell cycle; positive regulation of mammary gland epithelial cell proliferation; negative regulation of epithelial cell differentiation; negative regulation of transcription from RNA polymerase II promoter; Wnt receptor signaling pathway through beta-catenin; protein amino acid phosphorylation; Leydig cell differentiation; regulation of transcription, DNA-dependent; positive regulation of cell proliferation; Wnt receptor signaling pathway; transcription, DNA-dependent; unfolded protein response; mammary gland epithelial cell proliferation; response to organic nitrogen; cell cycle; cell division; positive regulation of protein amino acid phosphorylation; regulation of cyclin-dependent protein kinase activity; regulation of protein kinase activity; response to DNA damage stimulus; G1/S transition of mitotic cell cycle |
| UniProt Code: | P25322 |
| NCBI GenInfo Identifier: | 116153 |
| NCBI Gene ID: | 12443 |
| NCBI Accession: | P25322. 1 |
| UniProt Related Accession: | P25322 |
| Molecular Weight: | 36kDa |
| NCBI Full Name: | G1/S-specific cyclin-D1 |
| NCBI Synonym Full Names: | cyclin D1 |
| NCBI Official Symbol: | Ccnd1 |
| NCBI Official Synonym Symbols: | cD1; CycD1; Cyl-1; PRAD1; bcl-1; AI327039 |
| NCBI Protein Information: | G1/S-specific cyclin-D1 |
| UniProt Protein Name: | G1/S-specific cyclin-D1 |
| Protein Family: | Chromosomal protein |
| UniProt Gene Name: | Ccnd1 |
| UniProt Entry Name: | CCND1_MOUSE |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 2000 | 51606 59836 | 55721 | 55693 |
| 1000 | 22299 25649 | 23974 | 23946 |
| 500 | 11555 10509 | 11032 | 11004 |
| 250 | 5043 5545 | 5294 | 5266 |
| 125 | 2743 2473 | 2608 | 2580 |
| 62.5 | 1411 1211 | 1311 | 1283 |
| 31.25 | 667 681 | 674 | 646 |
| 0 | 28 28 | 28 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Mouse CCND1 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Mouse CCND1 were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 101.08 | 200.99 | 916.22 | 97.14 | 203.15 | 853.87 |
| Standard deviation | 12.66 | 21.16 | 76.78 | 8.45 | 19.06 | 55.07 |
| C V (%) | 12.52 | 10.53 | 8.38 | 8.70 | 9.38 | 6.45 |
Recovery
The recovery of Mouse CCND1 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 95-107 | 101 |
| EDTA plasma (n=5) | 96-109 | 102 |
| Cell culture media (n=5) | 91-107 | 98 |
Linearity
Samples were spiked with high concentrations of Mouse CCND1 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 87-98 | 100-117 | 95-108 |
| Average (%) | 92 | 108 | 103 | |
| 1:4 | Range (%) | 96-111 | 93-104 | 99-115 |
| Average (%) | 104 | 99 | 107 | |
| 1:8 | Range (%) | 90-105 | 89-99 | 92-104 |
| Average (%) | 97 | 94 | 98 | |
| 1:16 | Range (%) | 91-106 | 99-114 | 101-119 |
| Average (%) | 98 | 106 | 109 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
