Human LRP1 ELISA Kit
- SKU:
- HUFI01751
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q07954
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- LRP1, Prolow-density lipoprotein receptor-related protein 1, LRP-1, Alpha-2-macroglobulin receptor, A2MR, Apolipoprotein E receptor, APOER, CD91
- Reactivity:
- Human
- Research Area:
- Cell Biology
Description
Human LRP1 ELISA Kit
LRP1 (LDL Receptor Related Protein 1) is a protein that regulates cholesterol levels in the body. Mutations in the LRP1 gene can lead to increased cholesterol levels and an increased risk for heart disease. For example, some mutations can lead to an increase in the number of bad cholesterol particles (LDL) in the blood, while others can cause problems with the way the liver processes cholesterol. . Diseases associated with LRP1 include Keratosis Pilaris Atrophicans and Atrophoderma Vermiculata.
| Product Name: | Human LRP1 ELISA Kit |
| Product Code: | HUFI01751 |
| Size: | 96 Assays |
| Alias: | LRP1, Prolow-density lipoprotein receptor-related protein 1, LRP-1, Alpha-2-macroglobulin receptor, A2MR, Apolipoprotein E receptor, APOER, CD91 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human LRP1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human LRP1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human LRP1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human LRP1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | Q07954 |
| UniProt Protein Function: | LRP1: a receptor involved in endocytosis, phagocytosis of apoptotic cells, and neural signaling. Modulates cellular events including APP metabolism, kinase-dependent intracellular signaling, neuronal calcium signaling and neurotransmission. Involved in the plasma clearance of chylomicron remnants and activated alpha 2-macroglobulin, as well as the local metabolism of complexes between plasminogen activators and their endogenous inhibitors. Plays a fundamental role in cellular signaling pathways in the brain. Mediates neural NMDA gating via a complex of LRP1, PSD-95 and NMDAR. A type I membrane protein. After cleavage, the intracellular domain (LRPICD) is detected both in the cytoplasm and in the nucleus. Most abundant in liver, brain and lung. |
| UniProt Protein Details: | Protein type:Motility/polarity/chemotaxis; Cell surface; Membrane protein, integral; Receptor, misc. Chromosomal Location of Human Ortholog: 12q13.3 Cellular Component: focal adhesion; cell soma; clathrin-coated vesicle; lysosomal membrane; integral to plasma membrane; dendrite; cytoplasm; plasma membrane; nucleolus; coated pit; endosome; receptor complex Molecular Function:protein binding; lipoprotein transporter activity; protease binding; protein complex binding; apolipoprotein binding; calcium ion binding; receptor activity Biological Process: positive regulation of protein transport; receptor-mediated endocytosis; cell proliferation; positive regulation of lipid transport; cholesterol metabolic process; phototransduction, visible light; regulation of phospholipase A2 activity; negative regulation of Wnt receptor signaling pathway; lipoprotein transport; regulation of actin cytoskeleton organization and biogenesis; protein kinase C activation; lipoprotein metabolic process; negative regulation of neuron apoptosis; negative regulation of smooth muscle cell migration; retinoid metabolic process; regulation of cholesterol transport; apoptotic cell clearance; aging |
| NCBI Summary: | The protein encoded by this gene is an endocytic receptor involved in several cellular processes, including intracellular signaling, lipid homeostasis, and clearance of apoptotic cells. In addition, the encoded protein is necessary for the A2M-mediated clearance of secreted amyloid precursor protein and beta-amyloid, the main component of amyloid plaques found in Alzheimer patients. Expression of this gene decreases with age and has been found to be lower than controls in brain tissue from Alzheimer patients. [provided by RefSeq, Jan 2010] |
| UniProt Code: | Q07954 |
| NCBI GenInfo Identifier: | 317373384 |
| NCBI Gene ID: | 4035 |
| NCBI Accession: | Q07954.2 |
| UniProt Secondary Accession: | Q07954,Q2PP12, Q86SW0, Q8IVG8, |
| UniProt Related Accession: | Q07954 |
| Molecular Weight: | |
| NCBI Full Name: | Prolow-density lipoprotein receptor-related protein 1 |
| NCBI Synonym Full Names: | low density lipoprotein receptor-related protein 1 |
| NCBI Official Symbol: | LRP1 |
| NCBI Official Synonym Symbols: | APR; LRP; A2MR; CD91; APOER; LRP1A; TGFBR5; IGFBP3R |
| NCBI Protein Information: | prolow-density lipoprotein receptor-related protein 1; LRP-1; type V tgf-beta receptor; apolipoprotein E receptor; alpha-2-macroglobulin receptor; TbetaR-V/LRP-1/IGFBP-3 receptor |
| UniProt Protein Name: | Prolow-density lipoprotein receptor-related protein 1 |
| UniProt Synonym Protein Names: | Alpha-2-macroglobulin receptor; A2MR; Apolipoprotein E receptor; APOER; CD_antigen: CD91Cleaved into the following 3 chains:Low-density lipoprotein receptor-related protein 1 85 kDa subunit; LRP-85; Low-density lipoprotein receptor-related protein 1 515 kDa subunit; LRP-515; Low-density lipoprotein receptor-related protein 1 intracellular domain; LRPICD |
| Protein Family: | Low-density lipoprotein receptor-related protein |
| UniProt Gene Name: | LRP1 |
| UniProt Entry Name: | LRP1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Fill out our quote form below and a dedicated member of staff will get back to you within one working day!
Related Products
