Description
Human JAK2 ELISA
JAK2 encodes a non-receptor tyrosine kinase that plays a central role in cytokine and growth factor signalling. JAK2 recruits and phosphorylates signal transducer and activator of transcription (STAT) proteins. Dysregulation of the JAK2 signalling pathway produces increased cellular proliferation and myeloproliferative neoplasms of hematopoietic stem cells. A nonsynonymous mutation in the pseudokinase domain of JAK2 is associated with polycythemia vera and thrombocythemia.
Product Name: | Human JAK2 ELISA Kit |
Product Code: | HUFI02088 |
Size: | 96 Assays |
Alias: | JAK2, JAK-1, JAK1Atyrosine-protein kinase JAK1, JAK1B, Janus kinase 1, JTK3 |
Detection method: | Sandwich ELISA, Double Antibody |
Application: | This immunoassay kit allows for the in vitro quantitative determination of Human JAK2 concentrations in serum plasma and other biological fluids. |
Sensitivity: | 0.094ng/ml |
Range: | 0.156-10ng/ml |
Storage: | 4°C for 6 months |
Note: | For Research Use Only |
Recovery: | Matrices listed below were spiked with certain level of Human JAK2 and the recovery rates were calculated by comparing the measured value to the expected amount of Human JAK2 in samples. | ||||||||||||||||
| |||||||||||||||||
Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human JAK2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
Component | Quantity | Storage |
ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
Lyophilized Standard | 2 | 4°C/-20°C |
Sample/Standard Dilution Buffer | 20ml | 4°C |
Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
Antibody Dilution Buffer | 10ml | 4°C |
HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
SABC Dilution Buffer | 10ml | 4°C |
TMB Substrate | 10ml | 4°C (Protect from light) |
Stop Solution | 10ml | 4°C |
Wash Buffer(25X) | 30ml | 4°C |
Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
Uniprot | O60674 |
UniProt Protein Function: | JAK2: a non-receptor tyrosine-kinase involved in a specific subset of cytokine receptor signaling pathways, including IL-3, -5 and GM-CSF. Interacts with IL23R, SKB1 and STAM2. It has been found to be constitutively associated with the prolactin receptor and is required for responses to gamma interferon. Mice that do not express an active protein for this gene exhibit embryonic lethality associated with the absence of definitive erythropoiesis. Fusion of Jak2 to TEL1 (ETV6) by t(9;12)(p24;p13) causes myeloproliferative disease in humans and mouse models. The Jak inhibitor AG490 inhibits constitutive Jak2 phosphorylation and causes apoptosis in cells from breast cancer and relapsing acute lymphoblastic leukemia. A single activating mutation is associated with several hematological malignancies. Inhibitor: AG490. |
UniProt Protein Details: | Protein type:Protein kinase, TK; EC 2.7.10.2; Kinase, protein; Oncoprotein; Protein kinase, tyrosine (non-receptor); TK group; JakA family Chromosomal Location of Human Ortholog: 9p24 Cellular Component: caveola; cytoplasm; cytoskeleton; cytosol; extrinsic to internal side of plasma membrane; lipid raft; nuclear matrix; nucleoplasm; nucleus Molecular Function:acetylcholine receptor binding; ATP binding; growth hormone receptor binding; heme binding; histone binding; insulin receptor substrate binding; interleukin-12 receptor binding; metal ion binding; non-membrane spanning protein tyrosine kinase activity; peptide hormone receptor binding; phosphoinositide 3-kinase binding; protein binding; protein C-terminus binding; protein kinase activity; protein kinase binding; protein-tyrosine kinase activity; Ras guanyl-nucleotide exchange factor activity; receptor binding; SH2 domain binding; type 1 angiotensin receptor binding Biological Process: actin filament polymerization; activation of MAPKK activity; adaptive immune response; apoptosis; axon regeneration; blood coagulation; caspase activation; cell differentiation; cell migration; cell motility; cytokine and chemokine mediated signaling pathway; elevation of cytosolic calcium ion concentration; enzyme linked receptor protein signaling pathway; erythrocyte differentiation; G-protein coupled receptor protein signaling pathway; induction of apoptosis by oxidative stress; innate immune response; JAK-STAT cascade; MAPKKK cascade; mesoderm development; mineralocorticoid receptor signaling pathway; negative regulation of cell proliferation; negative regulation of cell-cell adhesion; negative regulation of DNA binding; negative regulation of heart contraction; negative regulation of neuron apoptosis; peptidyl-tyrosine phosphorylation; platelet-derived growth factor receptor signaling pathway; positive regulation of cell activation; positive regulation of cell differentiation; positive regulation of cell migration; positive regulation of cell proliferation; positive regulation of DNA binding; positive regulation of GTPase activity; positive regulation of inflammatory response; positive regulation of insulin secretion; positive regulation of interleukin-1 beta production; positive regulation of nitric oxide biosynthetic process; positive regulation of nitric-oxide synthase biosynthetic process; positive regulation of peptidyl-tyrosine phosphorylation; positive regulation of phosphoinositide 3-kinase cascade; positive regulation of phosphoprotein phosphatase activity; positive regulation of protein import into nucleus, translocation; positive regulation of transcription factor activity; positive regulation of tumor necrosis factor production; positive regulation of tyrosine phosphorylation of Stat3 protein; positive regulation of tyrosine phosphorylation of Stat5 protein; protein amino acid autophosphorylation; protein amino acid phosphorylation; regulation of apoptosis; regulation of cell proliferation; regulation of inflammatory response; response to antibiotic; response to hydroperoxide; response to lipopolysaccharide; signal transduction; STAT protein nuclear translocation; tumor necrosis factor-mediated signaling pathway; tyrosine phosphorylation of JAK2 protein; tyrosine phosphorylation of STAT protein; tyrosine phosphorylation of Stat1 protein; tyrosine phosphorylation of Stat3 protein; tyrosine phosphorylation of Stat5 protein Disease: Budd-chiari Syndrome; Erythrocytosis, Familial, 1; Myelofibrosis; Polycythemia Vera; Thrombocythemia 3 |
NCBI Summary: | This gene product is a protein tyrosine kinase involved in a specific subset of cytokine receptor signaling pathways. It has been found to be constituitively associated with the prolactin receptor and is required for responses to gamma interferon. Mice that do not express an active protein for this gene exhibit embryonic lethality associated with the absence of definitive erythropoiesis. [provided by RefSeq, Jul 2008] |
UniProt Code: | O60674 |
NCBI GenInfo Identifier: | 12643404 |
NCBI Gene ID: | 3717 |
NCBI Accession: | O60674.2 |
UniProt Secondary Accession: | O60674,O14636, O75297, |
UniProt Related Accession: | O60674 |
Molecular Weight: | 130,674 Da |
NCBI Full Name: | Tyrosine-protein kinase JAK2 |
NCBI Synonym Full Names: | Janus kinase 2 |
NCBI Official Symbol: | JAK2 |
NCBI Official Synonym Symbols: | JTK10; THCYT3 |
NCBI Protein Information: | tyrosine-protein kinase JAK2 |
UniProt Protein Name: | Tyrosine-protein kinase JAK2 |
UniProt Synonym Protein Names: | Janus kinase 2; JAK-2 |
Protein Family: | Tyrosine-protein kinase |
UniProt Gene Name: | JAK2 |
UniProt Entry Name: | JAK2_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
Step | Protocol |
1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
2. | Aliquot 0.1ml standard solutions into the standard wells. |
3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type | Protocol |
Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Fill out our quote form below and a dedicated member of staff will get back to you within one working day!