Human Cell Biology ELISA Kits 4
Human DAO (Diamine Oxidase) CLIA Kit (HUES00707)
- SKU:
- HUES00707
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 0.47ng/mL
- Range:
- 0.78-50ng/mL
- ELISA Type:
- Sandwich
- Synonyms:
- AOC1, ABP1, Amiloride Binding Protein 1, Amine Oxidase(Copper-Containing)
- Reactivity:
- Human
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cell Biology
Description
Assay type: | Sandwich |
Format: | 96T |
Assay time: | 4.5h |
Reactivity: | Human |
Detection method: | Chemiluminescence |
Detection range: | 0.78-50 ng/mL |
Sensitivity: | 0.47 ng/mL |
Sample volume: | 100µL |
Sample type: | Serum, plasma and other biological fluids |
Repeatability: | CV < 15% |
Specificity: | This kit recognizes Human DAO in samples. No significant cross-reactivity or interference between Human DAO and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Human DAO. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human DAO and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human DAO, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Human DAO. The concentration of Human DAO in the samples can be calculated by comparing the RLU of the samples to the standard curve.
UniProt Protein Function: | DAO: Regulates the level of the neuromodulator D-serine in the brain. Has high activity towards D-DOPA and contributes to dopamine synthesis. Could act as a detoxifying agent which removes D-amino acids accumulated during aging. Acts on a variety of D- amino acids with a preference for those having small hydrophobic side chains followed by those bearing polar, aromatic, and basic groups. Does not act on acidic amino acids. Belongs to the DAMOX/DASOX family. |
UniProt Protein Details: | Protein type:Amino Acid Metabolism - glycine, serine and threonine; Other Amino Acids Metabolism - D-Arginine and D-ornithine; Oxidoreductase; Amino Acid Metabolism - arginine and proline; EC 1. 4. 3. 3 Chromosomal Location of Human Ortholog: 12q24 Cellular Component: peroxisomal membrane; peroxisomal matrix; mitochondrial outer membrane; peroxisome; cytosol Molecular Function:protein dimerization activity; protein binding; cofactor binding; D-amino-acid oxidase activity; receptor binding Biological Process: proline catabolic process; glyoxylate metabolic process; dopamine biosynthetic process; leucine metabolic process Disease: Schizophrenia |
NCBI Summary: | This gene encodes the peroxisomal enzyme D-amino acid oxidase. The enzyme is a flavoprotein which uses flavin adenine dinucleotide (FAD) as its prosthetic group. Its substrates include a wide variety of D-amino acids, but it is inactive on the naturally occurring L-amino acids. Its biological function is not known; it may act as a detoxifying agent which removes D-amino acids that accumulate during aging. In mice, it degrades D-serine, a co-agonist of the NMDA receptor. This gene may play a role in the pathophysiology of schizophrenia. [provided by RefSeq, Jul 2008] |
UniProt Code: | P14920 |
NCBI GenInfo Identifier: | 25453448 |
NCBI Gene ID: | 1610 |
NCBI Accession: | P14920. 3 |
UniProt Secondary Accession: | P14920,Q16758, Q8N6R2, B2R7I5, |
UniProt Related Accession: | P14920 |
Molecular Weight: | 39,474 Da |
NCBI Full Name: | D-amino-acid oxidase |
NCBI Synonym Full Names: | D-amino-acid oxidase |
NCBI Official Symbol: | DAO |
NCBI Official Synonym Symbols: | DAAO; OXDA; DAMOX |
NCBI Protein Information: | D-amino-acid oxidase; D-amino acid oxidase |
UniProt Protein Name: | D-amino-acid oxidase |
Protein Family: | D-amino-acid oxidase |
UniProt Gene Name: | DAO |
UniProt Entry Name: | OXDA_HUMAN |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
Concentration (ng/mL) | RLU | Average | Corrected |
50 | 34361 39601 | 36981 | 36959 |
25 | 14230 15900 | 15065 | 15043 |
12.5 | 7237 6363 | 6800 | 6778 |
6.25 | 3335 3347 | 3341 | 3319 |
3.13 | 1903 1655 | 1779 | 1757 |
1.56 | 1102 980 | 1041 | 1019 |
0.78 | 676 688 | 682 | 660 |
0 | 21 23 | 22 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human DAO were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human DAO were tested on 3 different plates, 20 replicates in each plate.
Intra-assay Precision | Inter-assay Precision | |||||
Sample | 1 | 2 | 3 | 1 | 2 | 3 |
n | 20 | 20 | 20 | 20 | 20 | 20 |
Mean (ng/mL) | 2.49 | 4.70 | 17.20 | 2.32 | 4.23 | 18.26 |
Standard deviation | 0.23 | 0.52 | 1.09 | 0.26 | 0.31 | 1.16 |
C V (%) | 9.24 | 11.06 | 6.34 | 11.21 | 7.33 | 6.35 |
Recovery
The recovery of Human DAO spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
Sample Type | Range (%) | Average Recovery (%) |
Serum (n=5) | 95-111 | 101 |
EDTA plasma (n=5) | 89-101 | 96 |
Cell culture media (n=5) | 96-114 | 104 |
Linearity
Samples were spiked with high concentrations of Human DAO and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
1:2 | Range (%) | 100-117 | 95-106 | 102-116 |
Average (%) | 108 | 101 | 108 | |
1:4 | Range (%) | 90-101 | 91-107 | 85-98 |
Average (%) | 95 | 98 | 90 | |
1:8 | Range (%) | 95-109 | 103-116 | 99-113 |
Average (%) | 103 | 109 | 105 | |
1:16 | Range (%) | 94-105 | 97-112 | 91-105 |
Average (%) | 100 | 105 | 96 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
Item | Specifications | Storage |
Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
Reference Standard | 2 vials | |
Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
HRP Conjugate Diluent | 1 vial, 14 mL | |
Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
Plate Sealer | 5 pieces | |
Product Description | 1 copy | |
Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.