Rat Immunology ELISA Kits 1
Rat Haptoglobin ELISA Kit
(No reviews yet)
Write a Review
- SKU:
- RTFI00250
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P06866
- Sensitivity:
- 9.375ng/ml
- Range:
- 15.625-1000ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Hp, HP, HP-1, hp2-alpha, HPA1S, binding peptide, BP, haptoglobin, haptoglobin alpha, 1S-beta, haptoglobin alpha, 2FS-beta, haptoglobin, alpha polypeptide, haptoglobin, beta polypeptide, HPA1S
- Reactivity:
- Rat
Description
| Product Name: | Rat Hp (Haptoglobin) ELISA Kit |
| Product Code: | RTFI00250 |
| Size: | 96 Assays |
| Target: | Rat Hp |
| Alias: | Hp, HP, HP-1, hp2-alpha, HPA1S, binding peptide, BP, haptoglobin, haptoglobin alpha, 1S-beta, haptoglobin alpha, 2FS-beta, haptoglobin, alpha polypeptide, haptoglobin, beta polypeptide, HPA1S |
| Reactivity: | Rat |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Sensitivity: | 9.375ng/ml |
| Range: | 15.625-1000ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Rat Hp and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Hp in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Hp and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | P06866 |
| UniProt Protein Function: | HP: Haptoglobin combines with free plasma hemoglobin, preventing loss of iron through the kidneys and protecting the kidneys from damage by hemoglobin, while making the hemoglobin accessible to degradative enzymes. Defects in HP are the cause of anhaptoglobinemia (AHP). AHP is a condition characterized by the absence of the serum glycoprotein haptoglobin. Serum levels of haptoglobin vary among normal persons: levels are low in the neonatal period and in the elderly, differ by population, and can be influenced by environmental factors, such as infection. Secondary hypohaptoglobinemia can occur as a consequence of hemolysis, during which haptoglobin binds to free hemoglobin. Belongs to the peptidase S1 family. |
| UniProt Protein Details: | Protein type:Enzyme, misc.; Protease; Endoplasmic reticulum; Secreted, signal peptide; Secreted Cellular Component: endoplasmic reticulum; extracellular region; extracellular space; Golgi apparatus Molecular Function:antioxidant activity; hemoglobin binding; protein homodimerization activity; serine-type endopeptidase activity Biological Process: acute inflammatory response; acute-phase response; defense response to bacterium; immune system process; liver development; negative regulation of oxidoreductase activity; Notch signaling pathway; organ regeneration; proteolysis; response to cobalamin; response to drug; response to electrical stimulus; response to glucocorticoid stimulus; response to heat; response to hydrogen peroxide; response to hypoxia; response to L-ascorbic acid; response to lead ion; response to lipopolysaccharide; response to magnesium ion; response to organic cyclic substance; response to organic substance; response to X-ray; spermatogenesis |
| NCBI Summary: | may bind hemoglobin and mediate hemoglobin catabolism in lung cells; may play a role in inflammatory response [RGD, Feb 2006] |
| UniProt Code: | P06866 |
| NCBI GenInfo Identifier: | 60097941 |
| NCBI Gene ID: | 24464 |
| NCBI Accession: | NP_036714.2 |
| UniProt Secondary Accession: | P06866,Q5EBB4, Q7TP23, |
| UniProt Related Accession: | P06866 |
| Molecular Weight: | 40.5 kDa |
| NCBI Full Name: | haptoglobin |
| NCBI Synonym Full Names: | haptoglobin |
| NCBI Official Symbol: | Hp  |
| NCBI Official Synonym Symbols: | Ba1-647Â Â |
| NCBI Protein Information: | haptoglobin |
| UniProt Protein Name: | Haptoglobin |
| UniProt Synonym Protein Names: | Liver regeneration-related protein LRRG173; Zonulin |
| UniProt Gene Name: | Hp  |
| UniProt Entry Name: | HPT_RAT |
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell Culture Supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell Lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue Homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| Tissue Lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Rat HP (Haptoglobin) ELISA Kit
OverviewProduct Name:Rat HP (Haptoglobin) ELISA KitProduct Code:AEES00423Assay Type:SandwichFormat:96TAssay Tim
Human Haptoglobin ELISA Kit
Human Haptoglobin ELISA KitHaptoglobin is an important protein as it functions to prevents oxygen from entering our blood and causing damage to our cells through oxygen toxicity. When haptoglobin...
