Rat Immunology ELISA Kits 1
Rat Cyp1b1 / Cytochrome P450 1B1 ELISA Kit
- SKU:
- RTFI00279
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q64678
- Sensitivity:
- 0.469ng/ml
- Range:
- 0.781-50ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Cyp1b1, Cytochrome P450, family 1, subfamily B, polypeptide 1, Cytochrome P450RAP
- Reactivity:
- Rat
- Research Area:
- Metabolism
Description
| Product Name: | Rat Cyp1b1 (Cytochrome P450 1B1) ELISA Kit |
| Product Code: | RTFI00279 |
| Size: | 96 Assays |
| Target: | Rat Cyp1b1 |
| Alias: | Cyp1b1, Cytochrome P450, family 1, subfamily B, polypeptide 1, Cytochrome P450RAP |
| Reactivity: | Rat |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Sensitivity: | 0.469ng/ml |
| Range: | 0.781-50ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Rat Cyp1b1 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Cyp1b1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Cyp1b1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | Q64678 |
| UniProt Protein Function: | CYP1B1: Cytochromes P450 are a group of heme-thiolate monooxygenases. In liver microsomes, this enzyme is involved in an NADPH-dependent electron transport pathway. It oxidizes a variety of structurally unrelated compounds, including steroids, fatty acids, and xenobiotics. Defects in CYP1B1 are the cause of primary congenital glaucoma type 3A (GLC3A). GLC3A is an autosomal recessive form of primary congenital glaucoma (PCG). PCG is characterized by marked increase of intraocular pressure at birth or early childhood, large ocular globes (buphthalmos) and corneal edema. It results from developmental defects of the trabecular meshwork and anterior chamber angle of the eye that prevent adequate drainage of aqueous humor. Defects in CYP1B1 are a cause of primary open angle glaucoma (POAG). POAG is a complex and genetically heterogeneous ocular disorder characterized by a specific pattern of optic nerve and visual field defects. The angle of the anterior chamber of the eye is open, and usually the intraocular pressure is increased. The disease is asymptomatic until the late stages, by which time significant and irreversible optic nerve damage has already taken place. In some cases, POAG shows digenic inheritance involving mutations in CYP1B1 and MYOC genes. Defects in CYP1B1 are a cause of Peters anomaly (PAN). Peters anomaly is a congenital defect of the anterior chamber of the eye. Belongs to the cytochrome P450 family. |
| UniProt Protein Details: | Protein type:Motility/polarity/chemotaxis; Oxidoreductase; Membrane protein, peripheral; Endoplasmic reticulum; Amino Acid Metabolism - tryptophan; EC 1.14.14.1; Xenobiotic Metabolism - metabolism by cytochrome P450 Cellular Component: endoplasmic reticulum membrane; integral to membrane; intracellular membrane-bound organelle; mitochondrion; nucleus Molecular Function:heme binding; iron ion binding; monooxygenase activity; oxidoreductase activity; oxidoreductase activity, acting on paired donors, with incorporation or reduction of molecular oxygen; oxidoreductase activity, acting on paired donors, with incorporation or reduction of molecular oxygen, reduced flavin or flavoprotein as one donor, and incorporation of one atom of oxygen Biological Process: adrenal gland development; angiogenesis; arachidonic acid metabolic process; aromatic compound metabolic process; benzene and derivative metabolic process; blood vessel morphogenesis; cell adhesion; collagen fibril organization; dibenzo-p-dioxin metabolic process; DNA modification; endothelial cell migration; estrogen metabolic process; induction of apoptosis by oxidative stress; inhibition of NF-kappaB transcription factor; male gonad development; membrane lipid catabolic process; negative regulation of cell adhesion mediated by integrin; negative regulation of cell migration; negative regulation of cell proliferation; nitric oxide biosynthetic process; positive regulation of angiogenesis; positive regulation of apoptosis; positive regulation of JAK-STAT cascade; positive regulation of smooth muscle cell migration; positive regulation of translation; response to arsenic; response to estradiol stimulus; response to follicle-stimulating hormone stimulus; response to nutrient; response to organic cyclic substance; response to organic substance; response to steroid hormone stimulus; response to toxin; retinal metabolic process; retinol metabolic process; steroid metabolic process; toxin metabolic process; xenobiotic metabolic process |
| NCBI Summary: | plays a role in polycyclic aromatic hydrocarbon metabolism in adrenal microsomes [RGD, Feb 2006] |
| UniProt Code: | Q64678 |
| NCBI GenInfo Identifier: | 6978737 |
| NCBI Gene ID: | 25426 |
| NCBI Accession: | NP_037072.1 |
| UniProt Related Accession: | Q64678 |
| Molecular Weight: | 61.9 kDa |
| NCBI Full Name: | cytochrome P450 1B1 |
| NCBI Synonym Full Names: | cytochrome P450, family 1, subfamily b, polypeptide 1 |
| NCBI Official Symbol: | Cyp1b1Â Â |
| NCBI Protein Information: | cytochrome P450 1B1 |
| UniProt Protein Name: | Cytochrome P450 1B1 |
| UniProt Synonym Protein Names: | CYPIB1; Cytochrome P450RAP |
| Protein Family: | Cytochrome |
| UniProt Gene Name: | Cyp1b1Â Â |
| UniProt Entry Name: | CP1B1_RAT |
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell Culture Supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell Lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue Homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| Tissue Lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
