Rat Immunology ELISA Kits 2
Rat Basigin / Emmprin / CD147 ELISA Kit
(No reviews yet)
Write a Review
- SKU:
- RTFI00448
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P26453
- Sensitivity:
- 46.875pg/ml
- Range:
- 78.125-5000pg/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Bsg, Glycoprotein CE9, OX-47 antigen
- Reactivity:
- Rat
Description
| Product Name: | Rat Bsg (Basigin) ELISA Kit |
| Product Code: | RTFI00448 |
| Size: | 96 Assays |
| Target: | Rat Bsg |
| Alias: | Bsg, Glycoprotein CE9, OX-47 antigen |
| Reactivity: | Rat |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Sensitivity: | 46.875pg/ml |
| Range: | 78.125-5000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Rat Bsg and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Bsg in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Bsg and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | P26453 |
| UniProt Protein Function: | BSG: Plays pivotal roles in spermatogenesis, embryo implantation, neural network formation and tumor progression. Stimulates adjacent fibroblasts to produce matrix metalloproteinases (MMPS). May target monocarboxylate transporters SLC16A1, SLC16A3 and SLC16A8 to plasma membranes of retinal pigment epithelium and neural retina. Seems to be a receptor for oligomannosidic glycans. In vitro, promotes outgrowth of astrocytic processes. Enriched on the surface of tumor cells. Up-regulated in gliomas. Its expression levels correlate with malignant potential of the tumor. Forms homooligomers in a cis-dependent manner on the plasma membrane. Forms a complex with MMP1 at the tumor cell surface. Interacts with SLC16A1 and SLC1A3; probably a BSG dimer is associated with a monocarboxylate transporter dimer. Interacts with ATP1B2, MAG and L1CAM. Interacts with AJAP1. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Membrane protein, integral; Immunoglobulin superfamily Cellular Component: focal adhesion; membrane; mitochondrion; integral to plasma membrane; plasma membrane; melanosome; sarcolemma; lipid raft; acrosomal membrane Molecular Function:mannose binding; protein binding Biological Process: response to mercury ion; response to peptide hormone stimulus; response to cAMP; decidualization; embryo implantation; odontogenesis of dentine-containing teeth |
| NCBI Summary: | MRC OX-47 antigen that is upregulated on activated lymphocytes; member of the immunoglobulin superfamily [RGD, Feb 2006] |
| UniProt Code: | P26453 |
| NCBI GenInfo Identifier: | 158081773 |
| NCBI Gene ID: | 25246 |
| NCBI Accession: | NP_001103352.1 |
| UniProt Secondary Accession: | P26453,Q7TNP1, |
| UniProt Related Accession: | P26453 |
| Molecular Weight: | |
| NCBI Full Name: | basigin isoform 1 |
| NCBI Synonym Full Names: | basigin (Ok blood group) |
| NCBI Official Symbol: | Bsg  |
| NCBI Official Synonym Symbols: | CE9; HT7; 5A11; Ox47R; EMMPRIN; basignin  |
| NCBI Protein Information: | basigin |
| UniProt Protein Name: | Basigin |
| UniProt Synonym Protein Names: | Glycoprotein CE9; OX-47 antigen; CD_antigen: CD147 |
| Protein Family: | Basigin |
| UniProt Gene Name: | Bsg  |
| UniProt Entry Name: | BASI_RAT |
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell Culture Supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell Lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue Homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| Tissue Lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Rabbit Emmprin(CD147) ELISA Kit
OverviewProduct Name:Rabbit Emmprin(CD147) ELISA KitProduct Code:AEFI00826Size:96TAlias:Emmprin, CD147, Basigin, BSGDe
Human Emmprin / CD147 ELISA Kit
Human Emmprin / CD147 ELISA KitEmmprin, also known as CD147, is a type of protein that is found on the surface of white blood cells. CD147 has been shown to be a prognostic indicator in a number of...
Mouse CD147(Basigin) ELISA Kit
OverviewProduct Name:Mouse CD147(Basigin) ELISA KitProduct Code:AEFI00680Size:96TAlias:Emmprin, CD147(Extracellular Matrix Metalloprotei
Human CD147/EMMPRIN PharmaGenie ELISA Kit (SBRS0362)
system_update_altDatasheetHuman CD147/EMMPRIN PharmaGenie ELISA Kit (SBRS0362)Overview
Human EMMPRIN/CD147 (Extracellular Matrix Metalloproteinase Inducer) ELISA Kit
OverviewProduct Name:Human EMMPRIN/CD147 (Extracellular Matrix Metalloproteinase Inducer) ELISA KitProduct Code:AEES00159Assay Type:Sandwich