Rat Immunology ELISA Kits 1

Rat AADAT / Kynurenine / alpha-aminoadipate aminotransferase ELISA Kit

(No reviews yet) Write a Review
SKU:
RTFI00341
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q64602
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich
Synonyms:
Aadat, AADAT, KAT2, AadAT, aminoadipate aminotransferase, EC 2.6.1.39, 2-aminoadipate aminotransferase, EC 2.6.1.7, 2-aminoadipate transaminase, KAT, AadAT, KAT2mitochondrial, Kynurenine aminotransferase II, Kynurenine--oxoglutaRate aminotransferase
Reactivity:
Rat

Description

system_update_altDatasheetsystem_update_altMSDS
Product Name:Rat Aadat (Kynurenine/alpha-aminoadipate aminotransferase, mitochondrial) ELISA Kit
Product Code:RTFI00341
Size:96 Assays
Target:Rat Aadat
Alias:Aadat, AADAT, KAT2, AadAT, aminoadipate aminotransferase, EC 2.6.1.39, 2-aminoadipate aminotransferase, EC 2.6.1.7, 2-aminoadipate transaminase, KAT, AadAT, KAT2mitochondrial, Kynurenine aminotransferase II, Kynurenine--oxoglutaRate aminotransferase II, Kynurenine--oxoglutaRate transaminase II, L kynurenine, alpha aminoadipate aminotransferase
Reactivity:Rat
Detection Method:Sandwich ELISA, Double Antibody
Sensitivity:0.094ng/ml
Range:0.156-10ng/ml
Storage:4°C for 6 months
Note:For Research Use Only
Recovery:Matrices listed below were spiked with certain level of Rat Aadat and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Aadat in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)86-9791
EDTA plasma(n=5)85-10291
UFH plasma(n=5)86-10598
Linearity:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Aadat and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-104%91-103%88-102%
EDTA plasma(n=5)85-100%87-98%87-96%
UFH plasma(n=5)80-100%82-97%80-95%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:Q64602
UniProt Protein Function:AADAT: Transaminase with broad substrate specificity. Has transaminase activity towards aminoadipate, kynurenine, methionine and glutamate. Shows activity also towards tryptophan, aspartate and hydroxykynurenine. Accepts a variety of oxo-acids as amino- group acceptors, with a preference for 2-oxoglutarate, 2- oxocaproic acid, phenylpyruvate and alpha-oxo-gamma-methiol butyric acid. Can also use glyoxylate as amino-group acceptor (in vitro). Belongs to the class-I pyridoxal-phosphate-dependent aminotransferase family. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:

Protein type:EC 2.6.1.7; Amino Acid Metabolism - tryptophan; EC 2.6.1.39; Amino Acid Metabolism - lysine degradation; Transferase; Amino Acid Metabolism - lysine biosynthesis; Mitochondrial

Chromosomal Location of Human Ortholog: 4q33

Cellular Component: mitochondrial matrix

Molecular Function:protein homodimerization activity; kynurenine-oxoglutarate transaminase activity; 2-aminoadipate transaminase activity; pyridoxal phosphate binding

Biological Process: glutamate metabolic process; tryptophan catabolic process to kynurenine; L-lysine catabolic process to acetyl-CoA via saccharopine; lysine catabolic process; biosynthetic process; tryptophan catabolic process; 2-oxoglutarate metabolic process

NCBI Summary:This gene encodes a protein that is highly similar to mouse and rat kynurenine aminotransferase II. The rat protein is a homodimer with two transaminase activities. One activity is the transamination of alpha-aminoadipic acid, a final step in the saccaropine pathway which is the major pathway for L-lysine catabolism. The other activity involves the transamination of kynurenine to produce kynurenine acid, the precursor of kynurenic acid which has neuroprotective properties. Several transcript variants encoding two different isoforms have been found for this gene. [provided by RefSeq, Nov 2013]
UniProt Code:Q64602
NCBI GenInfo Identifier:7705897
NCBI Gene ID:51166
NCBI Accession:NP_057312.1
UniProt Secondary Accession:Q64602,Q9WVM8, Q64602,
UniProt Related Accession:Q8N5Z0
Molecular Weight:47,822 Da
NCBI Full Name:kynurenine/alpha-aminoadipate aminotransferase, mitochondrial isoform b
NCBI Synonym Full Names:aminoadipate aminotransferase
NCBI Official Symbol:AADAT  
NCBI Official Synonym Symbols:KAT2; KATII  
NCBI Protein Information:kynurenine/alpha-aminoadipate aminotransferase, mitochondrial; KAT/AadAT; 2-aminoadipate transaminase; kynurenine aminotransferase II; 2-aminoadipate aminotransferase; kynurenine--oxoglutarate transaminase 2; kynurenine--oxoglutarate transaminase II; kynu
UniProt Protein Name:Kynurenine/alpha-aminoadipate aminotransferase, mitochondrial
UniProt Synonym Protein Names:2-aminoadipate aminotransferase; 2-aminoadipate transaminase (EC:2.6.1.39); Alpha-aminoadipate aminotransferase; AadAT; Kynurenine aminotransferase II; Kynurenine--oxoglutarate aminotransferase II; Kynurenine--oxoglutarate transaminase 2 (EC:2.6.1.7); Kynurenine--oxoglutarate transaminase II
UniProt Gene Name:AADAT  
UniProt Entry Name:AADAT_HUMAN
StepProcedure
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol
Serum:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

Plasma: Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid: Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant: Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates: Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates: Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk: Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
View AllClose

0 Reviews

View AllClose

Related Products