Mouse Metabolism ELISA Kits
Mouse WNT3A ELISA Kit
- SKU:
- MOFI00543
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P27467
- Sensitivity:
- 0.188ng/ml
- Range:
- 0.313-20ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- Wnt3a, WNT3A, MGC119418, MGC119419, MGC119420, protein Wnt-3a, wingless-type MMTV integRation site family, member 3A
- Reactivity:
- Mouse
- Research Area:
- Metabolism
Description
| Product Name: | Mouse WNT3A ELISA Kit |
| Product Code: | MOFI00543 |
| Size: | 96 Assays |
| Alias: | Wnt3a, WNT3A, MGC119418, MGC119419, MGC119420, protein Wnt-3a, wingless-type MMTV integRation site family, member 3A |
| Detection Method: | Sandwich ELISA |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Mouse Wnt3a concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.188ng/ml |
| Range: | 0.313-20ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Mouse Wnt3a and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Wnt3a in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Wnt3a and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra Assay: | CV <8% | ||||||||||||||||
| Inter Assay: | CV <10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8-12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P27467 |
| UniProt Protein Function: | WNT3A: Ligand for members of the frizzled family of seven transmembrane receptors. Wnt-3 and Wnt-3a play distinct roles in cell-cell signaling during morphogenesis of the developing neural tube. Interacts with PORCN. Interacts with APCDD1 and WLS. Component of the Wnt-Fzd-LRP5-LRP6 signaling complex that contains a WNT protein, a FZD protein and LRP5 or LRP6. Interacts directly in the complex with LRP6. Moderately expressed in placenta and at low levels in adult lung, spleen, and prostate. Belongs to the Wnt family. |
| UniProt Protein Details: | Protein type:Secreted; Secreted, signal peptide Cellular Component: extracellular space; proteinaceous extracellular matrix; cell surface; extracellular region Molecular Function:protein domain specific binding; protein binding; frizzled binding; transcription coactivator activity; receptor agonist activity; receptor binding; frizzled-2 binding Biological Process: positive regulation of mesodermal cell fate specification; axon guidance; extracellular matrix organization and biogenesis; positive regulation of protein binding; cell proliferation in forebrain; positive regulation of transcription, DNA-dependent; multicellular organismal development; positive regulation of receptor internalization; positive regulation of caspase activity; positive regulation of collateral sprouting in the absence of injury; Wnt receptor signaling pathway through beta-catenin; palate development; regulation of axonogenesis; signal transduction; negative regulation of axon extension involved in axon guidance; Wnt receptor signaling pathway in forebrain neuroblast division; negative regulation of neurogenesis; BMP signaling pathway; anterior/posterior pattern formation; mammary gland development; cell-cell signaling; regulation of cell differentiation; positive regulation of cell proliferation; positive regulation of B cell proliferation; somatic stem cell division; mesoderm development; hemopoiesis; heart looping; dorsoventral neural tube patterning; positive regulation of cytokine production; platelet activation; somitogenesis; inner ear morphogenesis; Wnt receptor signaling pathway; in utero embryonic development; hippocampus development; negative regulation of fat cell differentiation; positive regulation of peptidyl-serine phosphorylation; osteoblast differentiation; paraxial mesodermal cell fate commitment; organ morphogenesis; axonogenesis; signalosome assembly; spinal cord association neuron differentiation; positive regulation of transcription factor activity; positive regulation of transcription from RNA polymerase II promoter; positive regulation of protein amino acid phosphorylation; determination of left/right symmetry |
| UniProt Code: | P27467 |
| NCBI GenInfo Identifier: | 7106447 |
| NCBI Gene ID: | 22416 |
| NCBI Accession: | NP_033548.1 |
| UniProt Related Accession: | P27467 |
| Molecular Weight: | 39,258 Da |
| NCBI Full Name: | protein Wnt-3a |
| NCBI Synonym Full Names: | wingless-type MMTV integration site family, member 3A |
| NCBI Official Symbol: | Wnt3a |
| NCBI Official Synonym Symbols: | vt; Wnt-3a |
| NCBI Protein Information: | protein Wnt-3a; vestigial tail; wingless-related MMTV integration site 3A |
| UniProt Protein Name: | Protein Wnt-3a |
| UniProt Gene Name: | Wnt3a |
| UniProt Entry Name: | WNT3A_MOUSE |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
