Mouse Immunology ELISA Kits
Mouse HMGB-1 (High mobility group protein B1) CLIA Kit (MOES00369)
- SKU:
- MOES00369
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 4.69pg/mL
- Range:
- 7.81-500pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- HMGB1, HMG1, HMG3, SBP-1, Amphoterin
- Reactivity:
- Mouse
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Immunology
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Mouse |
| Detection method: | Chemiluminescence |
| Detection range: | 7.81-500 pg/mL |
| Sensitivity: | 4.69 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Mouse HMGB-1 in samples. No significant cross-reactivity or interference between Mouse HMGB-1 and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Mouse HMGB-1. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Mouse HMGB-1 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Mouse HMGB-1, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Mouse HMGB-1. The concentration of Mouse HMGB-1 in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | HMGB1: DNA binding proteins that associates with chromatin and has the ability to bend DNA. Binds preferentially single-stranded DNA. Involved in V(D)J recombination by acting as a cofactor of the RAG complex. Acts by stimulating cleavage and RAG protein binding at the 23 bp spacer of conserved recombination signal sequences (RSS). Heparin-binding protein that has a role in the extension of neurite-type cytoplasmic processes in developing cells. Component of the RAG complex composed of core components RAG1 and RAG2, and associated component HMGB1 or HMGB2. Belongs to the HMGB family. |
| UniProt Protein Details: | Protein type:DNA repair, damage; Nuclear receptor co-regulator Cellular Component: extracellular space; neuron projection; cytoplasm; nucleus Molecular Function:crossed form four-way junction DNA binding; open form four-way junction DNA binding; cytokine activity; bent DNA binding; chromatin binding; protein kinase activator activity Biological Process: positive regulation of myeloid cell differentiation; response to glucocorticoid stimulus; positive regulation of mitotic cell cycle; positive regulation of glycogen catabolic process; DNA geometric change; induction of positive chemotaxis; chromatin remodeling; eye development; positive regulation of protein kinase activity; positive regulation of mesenchymal cell proliferation; positive regulation of transcription from RNA polymerase II promoter; positive regulation of protein amino acid phosphorylation; positive regulation of cell migration; lung development |
| NCBI Summary: | This gene encodes a protein that belongs to the High Mobility Group-box superfamily. The encoded non-histone, nuclear DNA-binding protein regulates transcription, and is involved in organization of DNA. This protein plays a role in several cellular processes, including inflammation, cell differentiation and tumor cell migration. Multiple pseudogenes of this gene have been identified. Alternative splicing results in multiple transcript variants that encode the same protein. [provided by RefSeq, Sep 2015] |
| UniProt Code: | P63158 |
| NCBI GenInfo Identifier: | 6754208 |
| NCBI Gene ID: | 15289 |
| NCBI Accession: | NP_034569. 1 |
| UniProt Secondary Accession: | P63158,P07155, P27109, P27428, |
| UniProt Related Accession: | P63158 |
| Molecular Weight: | 26. 4kDa |
| NCBI Full Name: | high mobility group protein B1 |
| NCBI Synonym Full Names: | high mobility group box 1 |
| NCBI Official Symbol: | Hmgb1 |
| NCBI Official Synonym Symbols: | DEF; p30; Hmg1; HMG-1; SBP-1; amphoterin |
| NCBI Protein Information: | high mobility group protein B1; high mobility group protein 1 |
| UniProt Protein Name: | High mobility group protein B1 |
| UniProt Synonym Protein Names: | High mobility group protein 1 |
| Protein Family: | High mobility group protein |
| UniProt Gene Name: | Hmgb1 |
| UniProt Entry Name: | HMGB1_MOUSE |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 500 | 49673 53401 | 51537 | 51508 |
| 250 | 18919 23077 | 20998 | 20969 |
| 125 | 9525 9267 | 9396 | 9367 |
| 62.5 | 4480 4544 | 4512 | 4483 |
| 31.25 | 2340 2258 | 2299 | 2270 |
| 15.63 | 1254 1246 | 1250 | 1221 |
| 7.81 | 698 782 | 740 | 711 |
| 0 | 29 29 | 29 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Mouse HMGB-1 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Mouse HMGB-1 were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 24.08 | 64.70 | 219.31 | 25.60 | 62.53 | 206.96 |
| Standard deviation | 2.40 | 5.23 | 13.33 | 2.91 | 4.69 | 22.77 |
| C V (%) | 9.97 | 8.08 | 6.08 | 11.37 | 7.50 | 11.00 |
Recovery
The recovery of Mouse HMGB-1 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 93-110 | 100 |
| EDTA plasma (n=5) | 92-107 | 100 |
| Cell culture media (n=5) | 90-101 | 95 |
Linearity
Samples were spiked with high concentrations of Mouse HMGB-1 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 88-100 | 98-114 | 97-114 |
| Average (%) | 93 | 105 | 104 | |
| 1:4 | Range (%) | 100-115 | 100-111 | 103-119 |
| Average (%) | 109 | 105 | 109 | |
| 1:8 | Range (%) | 85-99 | 97-107 | 85-100 |
| Average (%) | 91 | 102 | 92 | |
| 1:16 | Range (%) | 89-103 | 86-97 | 88-102 |
| Average (%) | 96 | 92 | 95 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
Rat HMGB-1 (High Mobility Group Protein B1) ELISA Kit
