Mouse Cell Signalling ELISA Kits 2
Mouse GDF3 (Growth Differentiation Factor 3) CLIA Kit (MOES00316)
- SKU:
- MOES00316
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 9.38pg/mL
- Range:
- 15.63-1000pg/mL
- ELISA Type:
- Sandwich
- Reactivity:
- Mouse
- Sample Type:
- Serum, plasma and other biological fluids
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Mouse |
| Detection method: | Chemiluminescence |
| Detection range: | 15.63-1000 pg/mL |
| Sensitivity: | 9.38 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Mouse GDF3 in samples. No significant cross-reactivity or interference between Mouse GDF3 and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Mouse GDF3. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Mouse GDF3 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Mouse GDF3, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Mouse GDF3. The concentration of Mouse GDF3 in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | GDF3: Defects in GDF3 are the cause of Klippel-Feil syndrome type 3 (KFS3); also called Klippel-Feil syndrome autosomal dominant 3. KFS3 is a skeletal disorder characterized by congenital fusion of cervical vertebrae. It is due to a failure in the normal segmentation of vertebrae during the early weeks of fetal development. The clinical triad consists of short neck, low posterior hairline, and limited neck movement. Defects in GDF3 are the cause of microphthalmia isolated with coloboma type 6 (MCOPCB6); also called isolated colobomatous microphthalmia 6. MCOPCB6 is a disorder of eye formation, ranging from small size of a single eye to complete bilateral absence of ocular tissues. Ocular abnormalities like opacities of the cornea and lens, scaring of the retina and choroid, cataract and other abnormalities like cataract may also be present. Ocular colobomas are a set of malformations resulting from abnormal morphogenesis of the optic cup and stalk, and the fusion of the fetal fissure (optic fissure). Defects in GDF3 are a cause of microphthalmia isolated type 7 (MCOP7). MCOP7 is a disorder of eye formation, ranging from small size of a single eye to complete bilateral absence of ocular tissues. Ocular abnormalities like opacities of the cornea and lens, scaring of the retina and choroid, cataract and other abnormalities like cataract may also be present. Belongs to the TGF-beta family. |
| UniProt Protein Details: | Protein type:Secreted, signal peptide; Secreted; Cytokine Chromosomal Location of Human Ortholog: 12p13. 1 Cellular Component: extracellular space; cytoplasm Molecular Function:growth factor activity; cytokine activity; protein kinase binding; transforming growth factor beta receptor binding Biological Process: response to dietary excess; in utero embryonic development; somite rostral/caudal axis specification; notochord development; formation of anatomical boundary; negative regulation of BMP signaling pathway; regulation of apoptosis; eye development; regulation of MAPKKK cascade; regulation of cell fate commitment; negative regulation of epidermal cell differentiation; mesoderm development; negative regulation of myoblast differentiation; cell development; skeletal development; endoderm development; growth Disease: Microphthalmia, Isolated 7; Klippel-feil Syndrome 3, Autosomal Dominant; Microphthalmia, Isolated, With Coloboma 6 |
| UniProt Code: | Q07104 |
| NCBI GenInfo Identifier: | 9652072 |
| NCBI Gene ID: | |
| NCBI Accession: | |
| Molecular Weight: | Based on N-terminal sequencing, the refolded mature mouse GDF-3 protein begins with Ala 253. The recombinant monomeric mouse GDF-3 has a calculated molecular mass of 13. 1 kD. |
| NCBI Full Name: | growth differentiation factor 3 |
| UniProt Protein Name: | |
| UniProt Gene Name: |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 1000 | 51344 56006 | 53675 | 53650 |
| 500 | 22191 22787 | 22489 | 22464 |
| 250 | 10523 9899 | 10211 | 10186 |
| 125 | 4536 5266 | 4901 | 4876 |
| 62.5 | 2538 2368 | 2453 | 2428 |
| 31.25 | 1296 1266 | 1281 | 1256 |
| 15.63 | 684 732 | 708 | 683 |
| 0 | 25 25 | 25 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Mouse GDF3 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Mouse GDF3 were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 50.12 | 119.75 | 468.33 | 53.84 | 125.67 | 447.52 |
| Standard deviation | 4.06 | 12.14 | 32.60 | 5.17 | 12.45 | 42.20 |
| C V (%) | 8.10 | 10.14 | 6.96 | 9.60 | 9.91 | 9.43 |
Recovery
The recovery of Mouse GDF3 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 97-114 | 104 |
| EDTA plasma (n=5) | 85-96 | 91 |
| Cell culture media (n=5) | 96-109 | 103 |
Linearity
Samples were spiked with high concentrations of Mouse GDF3 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 92-107 | 88-98 | 94-108 |
| Average (%) | 99 | 93 | 101 | |
| 1:4 | Range (%) | 89-100 | 94-108 | 90-104 |
| Average (%) | 94 | 102 | 97 | |
| 1:8 | Range (%) | 100-117 | 101-113 | 98-114 |
| Average (%) | 107 | 106 | 105 | |
| 1:16 | Range (%) | 94-107 | 86-99 | 94-112 |
| Average (%) | 99 | 91 | 102 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
