Mouse Cell Biology ELISA Kits 2
Mouse BMP-1 (Bone Morphogenetic Protein 1) ELISA Kit (MOES00772)
- SKU:
- MOES00772
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P98063
- Sensitivity:
- 46.88pg/mL
- Range:
- 78.13-5000pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- BMP1, OI13, PCOLC, PCP, PCP2, TLD
- Reactivity:
- Mouse
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cell Biology
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Mouse |
| Detection Method: | Colormetric |
| Detection Range: | 78.13-5000 pg/mL |
| Sensitivity: | 46.88 pg/mL |
| Sample Volume Required Per Well: | 100µL |
| Sample Type: | Serum, plasma and other biological fluids |
| Specificity: | This kit recognizes Mouse BMP-1 in samples. No significant cross-reactivity or interference between Mouse BMP-1 and analogues was observed. |
This ELISA kit uses Sandwich-ELISA as the method. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to Mouse BMP-1. Standards or samples are added to the appropriate micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Mouse BMP-1 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Mouse BMP-1, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by adding Stop Solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of Mouse BMP-1. The concentration of Mouse BMP-1 in samples can be calculated by comparing the OD of the samples to the standard curve.
| UniProt Protein Function: | BMP1: Cleaves the C-terminal propeptides of procollagen I, II and III. Induces cartilage and bone formation. May participate in dorsoventral patterning during early development by cleaving chordin (CHRD). Defects in BMP1 are a cause of autosomal recessive osteogenesis imperfecta (AR-OI). A connective tissue disorder characterized by bone fragility, progressively deforming bones, bowing of limbs due to multiple fractures, very short stature, a triangular face, severe scoliosis, and grayish sclera. AR-OI due to BMP1 mutations belongs to the group of osteogenesis imperfecta type III in the Sillence classification. Belongs to the peptidase M12A family. 7 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Protease; Cytokine; EC 3. 4. 24. 19 Cellular Component: Golgi apparatus; extracellular space; proteinaceous extracellular matrix; extracellular region Molecular Function:peptidase activity; protein binding; growth factor activity; zinc ion binding; hydrolase activity; metallopeptidase activity; metalloendopeptidase activity; metal ion binding; cytokine activity; calcium ion binding Biological Process: ossification; cartilage development; multicellular organismal development; proteolysis; cell differentiation |
| NCBI Summary: | This gene encodes a metalloproteinase that plays an essential role in the formation of the extracellular matrix and is also able to induce ectopic bone formation. Unlike other bone morphogenetic proteins, the protein encoded by this gene is not closely related to transforming growth factor-beta. This protein plays in role several developmental processes. In humans, mutations in this gene are associated with osteogenesis imperfecta and with increased bone mineral density and multiple recurrent fractures. Alternative splicing results in multiple transcript variants. [provided by RefSeq, Dec 2013] |
| UniProt Code: | P98063 |
| NCBI GenInfo Identifier: | 42734447 |
| NCBI Gene ID: | 12153 |
| NCBI Accession: | NP_033885. 2 |
| UniProt Secondary Accession: | P98063,Q6NZM2, |
| UniProt Related Accession: | P98063 |
| Molecular Weight: | 111,666 Da |
| NCBI Full Name: | bone morphogenetic protein 1 |
| NCBI Synonym Full Names: | bone morphogenetic protein 1 |
| NCBI Official Symbol: | Bmp1 |
| NCBI Official Synonym Symbols: | Pcp; Tld |
| NCBI Protein Information: | bone morphogenetic protein 1 |
| UniProt Protein Name: | Bone morphogenetic protein 1 |
| UniProt Synonym Protein Names: | Mammalian tolloid protein; mTld; Procollagen C-proteinase; PCP |
| Protein Family: | Bone morphogenetic protein |
| UniProt Gene Name: | Bmp1 |
| UniProt Entry Name: | BMP1_MOUSE |
As the OD values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | O.D | Average | Corrected |
| 5000 | 2.476 2.5 | 2.488 | 2.415 |
| 2500 | 1.662 1.722 | 1.692 | 1.619 |
| 1250 | 1.039 1.025 | 1.032 | 0.959 |
| 625 | 0.528 0.56 | 0.544 | 0.471 |
| 312.5 | 0.299 0.281 | 0.29 | 0.217 |
| 156.25 | 0.192 0.176 | 0.184 | 0.111 |
| 78.13 | 0.128 0.13 | 0.129 | 0.056 |
| 0 | 0.073 0.073 | 0.073 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Mouse BMP-1 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Mouse BMP-1 were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 274.30 | 551.70 | 2021.20 | 294.30 | 537.30 | 1944.30 |
| Standard deviation | 15.10 | 22.60 | 68.70 | 18.80 | 31.20 | 93.30 |
| C V (%) | 5.50 | 4.10 | 3.40 | 6.39 | 5.81 | 4.80 |
Recovery
The recovery of Mouse BMP-1 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 93-107 | 99 |
| EDTA plasma (n=5) | 87-102 | 94 |
| Cell culture media (n=5) | 87-99 | 92 |
Linearity
Samples were spiked with high concentrations of Mouse BMP-1 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 94-109 | 99-112 | 93-106 |
| Average (%) | 101 | 105 | 100 | |
| 1:4 | Range (%) | 97-107 | 83-97 | 92-108 |
| Average (%) | 102 | 90 | 99 | |
| 1:8 | Range (%) | 98-114 | 86-96 | 94-108 |
| Average (%) | 104 | 91 | 100 | |
| 1:16 | Range (%) | 95-113 | 81-94 | 93-108 |
| Average (%) | 103 | 87 | 100 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro ELISA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent | 1 vial, 10 mL | 4°C(shading light) |
| Stop Solution | 1 vial, 10 mL | 4°C |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 90µL of Substrate Reagent to each well. Cover with a new plate seal and incubate forapproximately 15 min at 37°C. Protect the plate from light. Note: the reaction time can beshortened or extended according to the actual color change, but not by more than 30min.
- Add 50 µL of Stop Solution to each well. Note: Adding the stop solution should be done inthe same order as the substrate solution.
- Determine the optical density (OD value) of each well immediately with a microplate readerset at 450 nm.
Related Products
Human BMP-1 (Bone Morphogenetic Protein 1) ELISA Kit
Mouse BMP-6 (Bone Morphogenetic Protein 6) ELISA Kit
Human BMP-3 / Bone morphogenetic protein 3 ELISA Kit
Rabbit BMP-2 (Bone Morphogenetic Protein 2) ELISA Kit
Rat BMP-2 (Bone Morphogenetic Protein 2) ELISA Kit
