Mouse Cell Biology ELISA Kits 2
Mouse BLC (B-Lymphocyte Chemoattractant) CLIA Kit (MOES00120)
- SKU:
- MOES00120
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 4.69pg/mL
- Range:
- 7.81-500pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- CXCL13, ANGIE, ANGIE2, BCA-1, BCA1, BLR1L, SCYB13
- Reactivity:
- Mouse
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cell Biology
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Mouse |
| Detection method: | Chemiluminescence |
| Detection range: | 7.81-500 pg/mL |
| Sensitivity: | 4.69 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Mouse BLC in samples. No significant cross-reactivity or interference between Mouse BLC and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Mouse BLC. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Mouse BLC and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Mouse BLC, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Mouse BLC. The concentration of Mouse BLC in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | CXCL13: Chemotactic for B-lymphocytes but not for T-lymphocytes, monocytes and neutrophils. Does not induce calcium release in B- lymphocytes. Binds to BLR1/CXCR5. Belongs to the intercrine alpha (chemokine CxC) family. |
| UniProt Protein Details: | Protein type:Secreted; Motility/polarity/chemotaxis; Secreted, signal peptide Cellular Component: extracellular space; cell; extracellular region; cytosol Molecular Function:heparin binding; fibroblast growth factor binding; CXCR3 chemokine receptor binding; chemokine activity; protein heterodimerization activity; CXCR5 chemokine receptor binding; CCR10 chemokine receptor binding; cytokine activity; receptor agonist activity Biological Process: lymphocyte chemotaxis across high endothelial venule; response to lipopolysaccharide; positive regulation of leukocyte chemotaxis; chemotaxis; positive regulation of cell-cell adhesion mediated by integrin; positive regulation of integrin activation; lymph node development; regulation of cell proliferation; G-protein coupled receptor protein signaling pathway; elevation of cytosolic calcium ion concentration; cell surface receptor linked signal transduction; cell-cell signaling; defense response to bacterium; immune response; inflammatory response |
| UniProt Code: | O55038 |
| NCBI GenInfo Identifier: | 7673946 |
| NCBI Gene ID: | 55985 |
| NCBI Accession: | O55038. 1 |
| UniProt Related Accession: | O55038 |
| Molecular Weight: | |
| NCBI Full Name: | C-X-C motif chemokine 13 |
| NCBI Synonym Full Names: | chemokine (C-X-C motif) ligand 13 |
| NCBI Official Symbol: | Cxcl13 |
| NCBI Official Synonym Symbols: | BLC; Angie; BCA-1; BLR1L; ANGIE2; Scyb13; 4631412M08Rik |
| NCBI Protein Information: | C-X-C motif chemokine 13; CXC chemokine BLC; B lymphocyte chemoattractant; small-inducible cytokine B13; small inducible cytokine subfamily B (Cys-X-Cys), member 13 |
| UniProt Protein Name: | C-X-C motif chemokine 13 |
| UniProt Synonym Protein Names: | B lymphocyte chemoattractant; CXC chemokine BLC; Small-inducible cytokine B13 |
| Protein Family: | Beta carbonic anhydrase |
| UniProt Gene Name: | Cxcl13 |
| UniProt Entry Name: | CXL13_MOUSE |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 500 | 48063 55011 | 51537 | 51508 |
| 250 | 19288 22708 | 20998 | 20969 |
| 125 | 9619 9173 | 9396 | 9367 |
| 62.5 | 4253 4771 | 4512 | 4483 |
| 31.25 | 2324 2274 | 2299 | 2270 |
| 15.63 | 1272 1228 | 1250 | 1221 |
| 7.81 | 716 764 | 740 | 711 |
| 0 | 29 29 | 29 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Mouse BLC were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Mouse BLC were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 25.51 | 51.11 | 235.03 | 27.17 | 50.74 | 212.28 |
| Standard deviation | 2.48 | 5.15 | 16.62 | 2.81 | 3.85 | 24.41 |
| C V (%) | 9.72 | 10.08 | 7.07 | 10.34 | 7.59 | 11.50 |
Recovery
The recovery of Mouse BLC spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 92-106 | 99 |
| EDTA plasma (n=5) | 100-117 | 106 |
| Cell culture media (n=5) | 92-106 | 98 |
Linearity
Samples were spiked with high concentrations of Mouse BLC and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 100-115 | 93-106 | 85-97 |
| Average (%) | 107 | 100 | 90 | |
| 1:4 | Range (%) | 86-99 | 97-110 | 89-102 |
| Average (%) | 92 | 103 | 96 | |
| 1:8 | Range (%) | 101-116 | 92-104 | 94-108 |
| Average (%) | 106 | 97 | 100 | |
| 1:16 | Range (%) | 88-104 | 98-112 | 101-117 |
| Average (%) | 95 | 106 | 108 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
