Mouse Cardiovascular ELISA Kits
Mouse ANG (Angiogenin) CLIA Kit (MOES00061)
- SKU:
- MOES00061
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 9.38pg/mL
- Range:
- 15.63-1000pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- ALS9, HEL168, RNASE4, RNASE5
- Reactivity:
- Mouse
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cardiovascular
Description
Assay type: | Sandwich |
Format: | 96T |
Assay time: | 4.5h |
Reactivity: | Mouse |
Detection method: | Chemiluminescence |
Detection range: | 15.63-1000 pg/mL |
Sensitivity: | 9.38 pg/mL |
Sample volume: | 100µL |
Sample type: | Serum, plasma and other biological fluids |
Repeatability: | CV < 15% |
Specificity: | This kit recognizes Mouse ANG in samples. No significant cross-reactivity or interference between Mouse ANG and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Mouse ANG. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Mouse ANG and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Mouse ANG, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Mouse ANG. The concentration of Mouse ANG in the samples can be calculated by comparing the RLU of the samples to the standard curve.
UniProt Protein Function: | Binds to actin on the surface of endothelial cells; once bound, angiogenin is endocytosed and translocated to the nucleus. Stimulates ribosomal RNA synthesis including that containing the initiation site sequences of 45S rRNA. Cleaves tRNA within anticodon loops to produce tRNA-derived stress-induced fragments (tiRNAs) which inhibit protein synthesis and triggers the assembly of stress granules (SGs). Angiogenin induces vascularization of normal and malignant tissues. Angiogenic activity is regulated by interaction with RNH1 in vivo. |
NCBI Summary: | This gene encodes a member of the pancreatic ribonuclease A superfamily and is a potent inducer of neovascularization. The encoded protein is a secreted multifunctional tRNA-specific ribonuclease that promotes angiogenesis in response to angiogenetic stimuli such as hypoxia, mediates stress-induced translational repression by cleaving cellular tRNAs, stimulates cell proliferation by mediating rRNA transcription in prostate cancer cells, and is involved in neurite pathfinding. This gene resides in a cluster of highly related genes. It shares dual promoters and 5' exons with the ribonuclease, RNase A family 4 gene. Two alternatively spliced variants, with different 5' exons but the same coding exon, have been identified. Multiple pseudogenes have been found for this gene. [provided by RefSeq, Jun 2009] |
UniProt Code: | P21570 |
NCBI GenInfo Identifier: | 239835771 |
NCBI Gene ID: | 11727 |
NCBI Accession: | NP_001155203. 1 |
UniProt Related Accession: | P21570 |
Molecular Weight: | 16,228 Da |
NCBI Full Name: | angiogenin |
NCBI Synonym Full Names: | angiogenin, ribonuclease, RNase A family, 5 |
NCBI Official Symbol: | Ang |
NCBI Official Synonym Symbols: | Ang1; Rnase5; Rnase5a; AI385586 |
NCBI Protein Information: | angiogenin |
UniProt Protein Name: | Angiogenin |
UniProt Synonym Protein Names: | Angiogenin-1; Ribonuclease 5; RNase 5 |
Protein Family: | Angiogenin |
UniProt Gene Name: | Ang |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
Concentration (pg/mL) | RLU | Average | Corrected |
1000 | 49722 57628 | 53675 | 53650 |
500 | 21716 23262 | 22489 | 22464 |
250 | 10506 9916 | 10211 | 10186 |
125 | 4691 5111 | 4901 | 4876 |
62.5 | 2533 2373 | 2453 | 2428 |
31.25 | 1368 1194 | 1281 | 1256 |
15.63 | 697 719 | 708 | 683 |
0 | 25 25 | 25 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Mouse ANG were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Mouse ANG were tested on 3 different plates, 20 replicates in each plate.
Intra-assay Precision | Inter-assay Precision | |||||
Sample | 1 | 2 | 3 | 1 | 2 | 3 |
n | 20 | 20 | 20 | 20 | 20 | 20 |
Mean (pg/mL) | 53.82 | 155.34 | 432.63 | 54.74 | 149.29 | 449.57 |
Standard deviation | 5.64 | 13.75 | 32.97 | 6.43 | 11.14 | 47.56 |
C V (%) | 10.48 | 8.85 | 7.62 | 11.75 | 7.46 | 10.58 |
Recovery
The recovery of Mouse ANG spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
Sample Type | Range (%) | Average Recovery (%) |
Serum (n=5) | 92-107 | 99 |
EDTA plasma (n=5) | 90-105 | 97 |
Cell culture media (n=5) | 88-101 | 94 |
Linearity
Samples were spiked with high concentrations of Mouse ANG and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
1:2 | Range (%) | 100-119 | 86-97 | 94-109 |
Average (%) | 109 | 91 | 101 | |
1:4 | Range (%) | 93-105 | 97-114 | 96-112 |
Average (%) | 99 | 104 | 103 | |
1:8 | Range (%) | 95-107 | 91-103 | 103-119 |
Average (%) | 101 | 98 | 110 | |
1:16 | Range (%) | 103-116 | 100-114 | 90-105 |
Average (%) | 109 | 108 | 96 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
Item | Specifications | Storage |
Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
Reference Standard | 2 vials | |
Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
HRP Conjugate Diluent | 1 vial, 14 mL | |
Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
Plate Sealer | 5 pieces | |
Product Description | 1 copy | |
Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.