Human Signal Transduction ELISA Kits
Human TIMP-3 (Tissue Inhibitors of Metalloproteinase 3) CLIA Kit (HUES00831)
- SKU:
- HUES00831
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 9.38pg/mL
- Range:
- 15.63-1000pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- TIMP3, SFD, HSMRK222, K222, K222TA2
- Reactivity:
- Human
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Signal Transduction
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Human |
| Detection method: | Chemiluminescence |
| Detection range: | 15.63-1000 pg/mL |
| Sensitivity: | 9.38 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Human TIMP-3 in samples. No significant cross-reactivity or interference between Human TIMP-3 and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Human TIMP-3. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human TIMP-3 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human TIMP-3, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Human TIMP-3. The concentration of Human TIMP-3 in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | TIMP3: Complexes with metalloproteinases (such as collagenases) and irreversibly inactivates them by binding to their catalytic zinc cofactor. May form part of a tissue-specific acute response to remodeling stimuli. Known to act on MMP-1, MMP-2, MMP-3, MMP-7, MMP-9, MMP-13, MMP-14 and MMP-15. Interacts with EFEMP1. Belongs to the protease inhibitor I35 (TIMP) family. |
| UniProt Protein Details: | Protein type:Motility/polarity/chemotaxis; Secreted; Secreted, signal peptide Chromosomal Location of Human Ortholog: 22q12. 3 Cellular Component: extracellular matrix; extracellular space; proteinaceous extracellular matrix; basement membrane; nucleus Molecular Function:metalloendopeptidase inhibitor activity; protein binding; protease binding; metal ion binding Biological Process: negative regulation of metalloenzyme activity; visual perception; response to cytokine stimulus; response to hormone stimulus; negative regulation of membrane protein ectodomain proteolysis Disease: Fundus Dystrophy, Pseudoinflammatory, Of Sorsby |
| NCBI Summary: | This gene belongs to the TIMP gene family. The proteins encoded by this gene family are inhibitors of the matrix metalloproteinases, a group of peptidases involved in degradation of the extracellular matrix (ECM). Expression of this gene is induced in response to mitogenic stimulation and this netrin domain-containing protein is localized to the ECM. Mutations in this gene have been associated with the autosomal dominant disorder Sorsby's fundus dystrophy. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P35625 |
| NCBI GenInfo Identifier: | 730948 |
| NCBI Gene ID: | 7078 |
| NCBI Accession: | P35625. 2 |
| UniProt Secondary Accession: | P35625,Q5THV4, Q9UC74, Q9UGS2, B2RBY9, |
| UniProt Related Accession: | P35625 |
| Molecular Weight: | 24,145 Da |
| NCBI Full Name: | Metalloproteinase inhibitor 3 |
| NCBI Synonym Full Names: | TIMP metallopeptidase inhibitor 3 |
| NCBI Official Symbol: | TIMP3 |
| NCBI Official Synonym Symbols: | SFD; K222; K222TA2; HSMRK222 |
| NCBI Protein Information: | metalloproteinase inhibitor 3; TIMP-3; MIG-5 protein; protein MIG-5; tissue inhibitor of metalloproteinases 3 |
| UniProt Protein Name: | Metalloproteinase inhibitor 3 |
| UniProt Synonym Protein Names: | Protein MIG-5; Tissue inhibitor of metalloproteinases 3; TIMP-3 |
| Protein Family: | Metalloproteinase inhibitor |
| UniProt Gene Name: | TIMP3 |
| UniProt Entry Name: | TIMP3_HUMAN |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 1000 | 52419 54931 | 53675 | 53650 |
| 500 | 21447 23531 | 22489 | 22464 |
| 250 | 10421 10001 | 10211 | 10186 |
| 125 | 4858 4944 | 4901 | 4876 |
| 62.5 | 2606 2300 | 2453 | 2428 |
| 31.25 | 1339 1223 | 1281 | 1256 |
| 15.63 | 675 741 | 708 | 683 |
| 0 | 25 25 | 25 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human TIMP-3 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human TIMP-3 were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 53.26 | 118.42 | 407.87 | 48.20 | 110.76 | 424.16 |
| Standard deviation | 4.37 | 10.50 | 39.03 | 5.25 | 9.00 | 47.17 |
| C V (%) | 8.21 | 8.87 | 9.57 | 10.89 | 8.13 | 11.12 |
Recovery
The recovery of Human TIMP-3 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 85-100 | 91 |
| EDTA plasma (n=5) | 87-99 | 92 |
| Cell culture media (n=5) | 97-112 | 103 |
Linearity
Samples were spiked with high concentrations of Human TIMP-3 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 93-107 | 97-113 | 85-100 |
| Average (%) | 99 | 104 | 92 | |
| 1:4 | Range (%) | 88-103 | 90-106 | 84-95 |
| Average (%) | 94 | 97 | 90 | |
| 1:8 | Range (%) | 84-97 | 89-100 | 89-102 |
| Average (%) | 91 | 95 | 95 | |
| 1:16 | Range (%) | 94-109 | 93-108 | 85-96 |
| Average (%) | 101 | 100 | 90 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
Mouse TIMP-3 (Tissue Inhibitors of Metalloproteinase 3) CLIA Kit (MOES00568)
Mouse Cell Signalling ELISA Kits 2
Rat TIMP-3 (Tissue Inhibitors of Metalloproteinase 3) CLIA Kit (RTES00558)
Rat Signaling ELISA Kits 3
Human TIMP-4 (Tissue Inhibitors of Metalloproteinase 4) CLIA Kit (HUES00832)
Human Cell Biology ELISA Kits 5
Human TIMP-1 (Tissue Inhibitors of Metalloproteinase 1) CLIA Kit (HUES00158)
Human Immunology ELISA Kits 1
Human TIMP-3 (Tissue Inhibitors of Metalloproteinase 3) ELISA Kit (HUES02489)
Human Signal Transduction ELISA Kits