Human Cardiovascular ELISA Kits
Human TFPI (Tissue Factor Pathway Inhibitor) CLIA Kit (HUES00142)
- SKU:
- HUES00142
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 18.75pg/mL
- Range:
- 31.25-2000pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- EPI, LACI, TFI, TFPI1, lipoprotein-associated coagulation inhibitor
- Reactivity:
- Human
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cardiovascular
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Human |
| Detection method: | Chemiluminescence |
| Detection range: | 31.25-2000 pg/mL |
| Sensitivity: | 18.75 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Human TFPI in samples. No significant cross-reactivity or interference between Human TFPI and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Human TFPI. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human TFPI and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human TFPI, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Human TFPI. The concentration of Human TFPI in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | Inhibits factor X (X(a)) directly and, in a Xa-dependent way, inhibits VIIa/tissue factor activity, presumably by forming a quaternary Xa/LACI/VIIa/TF complex. It possesses an antithrombotic action and also the ability to associate with lipoproteins in plasma. |
| NCBI Summary: | This gene encodes a Kunitz-type serine protease inhibitor that regulates the tissue factor (TF)-dependent pathway of blood coagulation. The coagulation process initiates with the formation of a factor VIIa-TF complex, which proteolytically activates additional proteases (factors IX and X) and ultimately leads to the formation of a fibrin clot. The product of this gene inhibits the activated factor X and VIIa-TF proteases in an autoregulatory loop. Inhibition of the encoded protein restores hemostasis in animal models of hemophilia. This gene encodes multiple protein isoforms that differ in their inhibitory activity, specificity and cellular localization. [provided by RefSeq, Jul 2016] |
| UniProt Code: | P10646 |
| NCBI GenInfo Identifier: | 125932 |
| NCBI Gene ID: | 7035 |
| NCBI Accession: | P10646. 1 |
| UniProt Secondary Accession: | P10646,O95103, Q53TS4, |
| UniProt Related Accession: | P10646 |
| Molecular Weight: | 28,653 Da |
| NCBI Full Name: | Tissue factor pathway inhibitor |
| NCBI Synonym Full Names: | tissue factor pathway inhibitor |
| NCBI Official Symbol: | TFPI |
| NCBI Official Synonym Symbols: | EPI; TFI; LACI; TFPI1 |
| NCBI Protein Information: | tissue factor pathway inhibitor |
| UniProt Protein Name: | Tissue factor pathway inhibitor |
| UniProt Synonym Protein Names: | Extrinsic pathway inhibitor; EPI; Lipoprotein-associated coagulation inhibitor; LACI |
| Protein Family: | Tissue factor pathway inhibitor |
| UniProt Gene Name: | TFPI |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 2000 | 52772 58670 | 55721 | 55693 |
| 1000 | 22450 25498 | 23974 | 23946 |
| 500 | 11437 10627 | 11032 | 11004 |
| 250 | 5116 5472 | 5294 | 5266 |
| 125 | 2633 2583 | 2608 | 2580 |
| 62.5 | 1348 1274 | 1311 | 1283 |
| 31.25 | 655 693 | 674 | 646 |
| 0 | 27 29 | 28 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human TFPI were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human TFPI were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 103.02 | 278.52 | 872.74 | 100.06 | 252.51 | 820.70 |
| Standard deviation | 12.23 | 29.86 | 69.91 | 9.28 | 24.27 | 89.54 |
| C V (%) | 11.87 | 10.72 | 8.01 | 9.27 | 9.61 | 10.91 |
Recovery
The recovery of Human TFPI spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 88-99 | 93 |
| EDTA plasma (n=5) | 95-109 | 103 |
| Cell culture media (n=5) | 97-114 | 105 |
Linearity
Samples were spiked with high concentrations of Human TFPI and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 85-97 | 94-106 | 97-111 |
| Average (%) | 92 | 101 | 105 | |
| 1:4 | Range (%) | 98-112 | 89-102 | 101-113 |
| Average (%) | 104 | 95 | 107 | |
| 1:8 | Range (%) | 90-101 | 100-114 | 91-104 |
| Average (%) | 95 | 108 | 96 | |
| 1:16 | Range (%) | 94-106 | 99-112 | 102-117 |
| Average (%) | 100 | 105 | 108 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
Human TFPI / Tissue factor pathway inhibitor ELISA Kit
