Human Signal Transduction ELISA Kits
Human TF (Transferrin) CLIA Kit (HUES00147)
- SKU:
- HUES00147
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 0.19ng/mL
- Range:
- 0.31-20ng/mL
- ELISA Type:
- Sandwich
- Synonyms:
- TF, PRO1557, PRO2086, TFQTL1, Siderophilin
- Reactivity:
- Human
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Signal Transduction
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Human |
| Detection method: | Chemiluminescence |
| Detection range: | 0.31-20 ng/mL |
| Sensitivity: | 0.19 ng/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Human TF in samples. No significant cross-reactivity or interference between Human TF and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Human TF. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human TF and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human TF, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Human TF. The concentration of Human TF in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | TF: Transferrins are iron binding transport proteins which can bind two Fe(3+) ions in association with the binding of an anion, usually bicarbonate. It is responsible for the transport of iron from sites of absorption and heme degradation to those of storage and utilization. Serum transferrin may also have a further role in stimulating cell proliferation. Defects in TF are the cause of atransferrinemia (ATRAF). Atransferrinemia is rare autosomal recessive disorder characterized by iron overload and hypochromic anemia. Belongs to the transferrin family. |
| UniProt Protein Details: | Protein type:Secreted; Secreted, signal peptide Chromosomal Location of Human Ortholog: 3q22. 1 Cellular Component: extracellular space; cell surface; early endosome; cytoplasmic membrane-bound vesicle; extracellular region; coated pit; recycling endosome; perinuclear region of cytoplasm; endocytic vesicle; apical plasma membrane; late endosome; basal plasma membrane; endosome membrane; vesicle Molecular Function:protein binding; ferric iron binding; ubiquitin protein ligase binding Biological Process: platelet activation; retinal homeostasis; platelet degranulation; cellular iron ion homeostasis; transferrin transport; blood coagulation; transmembrane transport Disease: Atransferrinemia |
| NCBI Summary: | This gene encodes a glycoprotein with an approximate molecular weight of 76. 5 kDa. It is thought to have been created as a result of an ancient gene duplication event that led to generation of homologous C and N-terminal domains each of which binds one ion of ferric iron. The function of this protein is to transport iron from the intestine, reticuloendothelial system, and liver parenchymal cells to all proliferating cells in the body. This protein may also have a physiologic role as granulocyte/pollen-binding protein (GPBP) involved in the removal of certain organic matter and allergens from serum. [provided by RefSeq, Sep 2009] |
| UniProt Code: | P02787 |
| NCBI GenInfo Identifier: | 313104271 |
| NCBI Gene ID: | 7018 |
| NCBI Accession: | P02787. 3 |
| UniProt Secondary Accession: | P02787,O43890, Q1HBA5, Q9NQB8, Q9UHV0, |
| UniProt Related Accession: | P02787 |
| Molecular Weight: | 77,064 Da |
| NCBI Full Name: | Serotransferrin |
| NCBI Synonym Full Names: | transferrin |
| NCBI Official Symbol: | TF |
| NCBI Official Synonym Symbols: | TFQTL1; PRO1557; PRO2086 |
| NCBI Protein Information: | serotransferrin; siderophilin; beta-1 metal-binding globulin |
| UniProt Protein Name: | Serotransferrin |
| UniProt Synonym Protein Names: | Beta-1 metal-binding globulin; Siderophilin |
| Protein Family: | Transferrin |
| UniProt Gene Name: | TF |
| UniProt Entry Name: | TRFE_HUMAN |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (ng/mL) | RLU | Average | Corrected |
| 20 | 33509 34455 | 33982 | 33950 |
| 10 | 12003 12937 | 12470 | 12438 |
| 5 | 5356 5144 | 5250 | 5218 |
| 2.5 | 2497 2551 | 2524 | 2492 |
| 1.25 | 1484 1282 | 1383 | 1351 |
| 0.63 | 885 849 | 867 | 835 |
| 0.31 | 607 639 | 623 | 591 |
| 0 | 31 33 | 32 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human TF were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human TF were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (ng/mL) | 0.96 | 2.70 | 7.33 | 1.04 | 2.69 | 7.41 |
| Standard deviation | 0.09 | 0.26 | 0.54 | 0.13 | 0.24 | 0.56 |
| C V (%) | 9.38 | 9.63 | 7.37 | 12.50 | 8.92 | 7.56 |
Recovery
The recovery of Human TF spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 84-96 | 91 |
| EDTA plasma (n=5) | 90-106 | 97 |
| Cell culture media (n=5) | 102-116 | 108 |
Linearity
Samples were spiked with high concentrations of Human TF and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 85-95 | 89-103 | 101-115 |
| Average (%) | 90 | 96 | 109 | |
| 1:4 | Range (%) | 89-101 | 100-118 | 88-100 |
| Average (%) | 96 | 109 | 95 | |
| 1:8 | Range (%) | 95-108 | 91-104 | 88-99 |
| Average (%) | 102 | 98 | 94 | |
| 1:16 | Range (%) | 99-112 | 93-107 | 95-112 |
| Average (%) | 105 | 100 | 102 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
Human TF (Transferrin) ELISA Kit
QuickStep Human TF (Transferrin) ELISA Kit
