Product Name:	Human PPP1CA / Serine / threonine-protein phosphatase PP1-alpha catalytic subunit ELISA Kit
Product Code:	HUFI02131
Size:	96 Assays
Alias:	PPP1CA, PPP1A, PP-1A
Detection method:	Sandwich ELISA, Double Antibody
Application:	This immunoassay kit allows for the in vitro quantitative determination of Human PPP1CA concentrations in serum plasma and other biological fluids.
Sensitivity:	0.188ng/ml
Range:	0.313-20ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Human PPP1CA and the recovery rates were calculated by comparing the measured value to the expected amount of Human PPP1CA in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	88-101	97
EDTA plasma(n=5)	85-103	98
UFH plasma(n=5)	86-103	95

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human PPP1CA and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	90-105%	86-102%	89-105%
EDTA plasma(n=5)	83-98%	82-98%	87-96%
UFH plasma(n=5)	82-100%	80-100%	83-95%

CV(%):

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8×12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

P62136

UniProt Protein Function:	PPP1CA: is a catalytic subunit of protein phosphatase 1 (PP1), aubiquitous cytosolic serine-threonine phosphatase. Composed of a catalytic subunit (PPP1CA, PPP1CB or PPP1CC) which is folded into its native form by inhibitor 2 and glycogen synthetase kinase 3, and then complexed to one or several targeting (or regulatory) subunits: PPP1R12A and PPP1R12B mediate binding to myosin; PPP1R3A, PPP1R3B, PPP1R3C and PPP1R3D mediate binding to glycogen; and PPP1R15A and PPP1R15B mediate binding to EIF2S1. PP1 is essential for cell division, plays critical roles in many cellular processes including glycogen metabolism, muscle contractility and protein synthesis, and is involved in the regulation of ionic conductances and long-term synaptic plasticity. Inhibits the synthesis of proteins involved in synaptic plasticity. Binds to the transcription factor cyclic AMP-dependent response element binding (CREB) and dephosphorylates it. May regulate chromatin condensation through regulation of histone H3 phosphorylation. Differentially expressed in gastric cancer. May participate in the neurodegenerative progress in Alzheimer's disease. Down-regulated in lung squamous cell carcinoma.
UniProt Protein Details:	Protein type:EC 3.1.3.16; Nucleolus; Protein phosphatase, Ser/Thr (non-receptor) Chromosomal Location of Human Ortholog: 11q13.2 Cellular Component: cell-cell adherens junction; cytoplasm; cytosol; nuclear chromosome, telomeric region; nucleoplasm; nucleus; plasma membrane Molecular Function:phosphoprotein phosphatase activity; phosphoric monoester hydrolase activity; protein binding Biological Process: circadian regulation of gene expression; dephosphorylation; entrainment of circadian clock by photoperiod; negative regulation of protein binding; protein amino acid dephosphorylation; regulation of circadian rhythm
NCBI Summary:	The protein encoded by this gene is one of the three catalytic subunits of protein phosphatase 1 (PP1). PP1 is a serine/threonine specific protein phosphatase known to be involved in the regulation of a variety of cellular processes, such as cell division, glycogen metabolism, muscle contractility, protein synthesis, and HIV-1 viral transcription. Increased PP1 activity has been observed in the end stage of heart failure. Studies in both human and mice suggest that PP1 is an important regulator of cardiac function. Mouse studies also suggest that PP1 functions as a suppressor of learning and memory. Three alternatively spliced transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Jul 2008]
UniProt Code:	P62136
NCBI GenInfo Identifier:	49065811
NCBI Gene ID:	5499
NCBI Accession:	P62136.1
UniProt Secondary Accession:	P62136,P08129, P20653, P22802, Q07161, A6NNR3, B2R908
UniProt Related Accession:	P62136
Molecular Weight:	Calculated MW: 32kDa/37kDa/38kDaObserved MW: 38kDa
NCBI Full Name:	Serine/threonine-protein phosphatase PP1-alpha catalytic subunit
NCBI Synonym Full Names:	protein phosphatase 1 catalytic subunit alpha
NCBI Official Symbol:	PPP1CA
NCBI Official Synonym Symbols:	PP1A; PP-1A; PPP1A; PP1alpha
NCBI Protein Information:	serine/threonine-protein phosphatase PP1-alpha catalytic subunit
UniProt Protein Name:	Serine/threonine-protein phosphatase PP1-alpha catalytic subunit
Protein Family:	Serine/threonine-protein phosphatase
UniProt Gene Name:	PPP1CA

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step	Protocol
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Fill out our quote form below and a dedicated member of staff will get back to you within one working day!

Neuroimmunologie: Das Immunsystem des ZNS

Interleukin-8-Signalisierung

Waardenburg-Syndrom und Klein-Waardenburg-Syndrom

Human PPP1CA / Serine / threonine-protein phosphatase PP1-alpha catalytic subunit ELISA Kit

Description