Human Integrin beta 1 / CD29 ELISA Kit
- SKU:
- HUFI01829
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P05556
- Sensitivity:
- 9.375pg/ml
- Range:
- 15.625-1000pg/ml
- ELISA Type:
- Sandwich
- Synonyms:
- ITGB1, CD29, CD29 antigen, Fibronectin receptor subunit beta, FNRBVLAB, GPIIA, integrin beta-1, integrin VLA-4 beta subunit, integrin, beta 1, fibronectin receptor, beta polypeptide, antigen CD29 includesMDF2, MSK12, MDF2, MSK12, very late activation
- Reactivity:
- Human
- Research Area:
- Cell Biology
Description
Human Integrin beta 1 / CD29 ELISA
ITGB1 (Integrin Subunit Beta 1) is a Protein Coding gene. Mutation in ITGB1 gene has been identified as a cause of limb girdle muscular dystrophy 2D, a less severe form of limb girdle muscular dystrophy. This mutation results in a pathogenic substitution of glycine for arginine at amino acid residue 143 (G143R) of the ?-integrin protein. An important paralog of ITGB1 is ITGB2. Diseases associated with ITGB1 include Gallbladder Cancer and Breast Cancer.
| Product Name: | Human Integrin beta 1 / CD29 ELISA Kit |
| Product Code: | HUFI01829 |
| Size: | 96 Assays |
| Alias: | ITGB1, CD29, CD29 antigen, Fibronectin receptor subunit beta, FNRBVLAB, GPIIA, integrin beta-1, integrin VLA-4 beta subunit, integrin, beta 1, fibronectin receptor, beta polypeptide, antigen CD29 includesMDF2, MSK12, MDF2, MSK12, very late activation protein, beta polypeptide, VLA-4 subunit beta, VLA-BETA |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human ITGB1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 9.375pg/ml |
| Range: | 15.625-1000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human ITGB1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human ITGB1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human ITGB1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P05556 |
| UniProt Protein Function: | ITGB1: an integral membrane protein that heterodimerizes with an alpha-3 chain, forming a receptor for many extracellular-matrix proteins including fibronectin, laminin, collagen, epiligrin and thrombospondin.. Beta 1 integrins recognize the amino-acid motif RGD in a wide array of ligands. Five alternatively spliced variants with alternate carboxy termini have been described. Two alternatively spliced isoforms have been described. Isoform beta-1a is widely expressed; other isoforms are generally expressed with a more restricted distribution. Isoform beta-1b is expressed in skin, liver, skeletal muscle, cardiac muscle, placenta, umbilical vein endothelial cells, neuroblastoma cells, lymphoma cells, hepatoma cells and astrocytoma cells. Isoforms beta-1c and beta-1c-2 are expressed in muscle, kidney, liver, placenta, cervical epithelium, umbilical vein endothelial cells, fibroblast cells, embryonal kidney cells, platelets and several blood cell lines. Isoform beta-c-2, rather than isoform beta-1c, is selectively expressed in primary t-cells. Isoform beta-1c is expressed in nonproliferating and differentiated prostate gland epithelial cells. Isoform beta-1d is expressed specifically in striated muscle (skeletal and cardiac muscle). |
| UniProt Protein Details: | Protein type:Cell adhesion; Cell surface; Membrane protein, integral; Motility/polarity/chemotaxis; Receptor, misc. Chromosomal Location of Human Ortholog: 10p11.22 Cellular Component: cell surface; cell-cell adherens junction; cytoplasm; filopodium; focal adhesion; lipid raft; membrane; neuromuscular junction; plasma membrane; receptor complex; ruffle; sarcolemma Molecular Function:actin binding; C-X3-C chemokine binding; cell adhesion molecule binding; coreceptor activity; fibronectin binding; protease binding; protein binding; protein complex binding; protein heterodimerization activity Biological Process: B cell differentiation; calcium-independent cell-matrix adhesion; cell adhesion mediated by integrin; cell migration; cell-cell adhesion mediated by integrin; cell-matrix adhesion; cell-substrate adhesion; cellular defense response; extracellular matrix organization and biogenesis; heterotypic cell-cell adhesion; homophilic cell adhesion; integrin-mediated signaling pathway; leukocyte adhesion; leukocyte migration; leukocyte tethering or rolling; mesodermal cell differentiation; positive regulation of apoptosis; positive regulation of GTPase activity; receptor internalization; regulation of immune response; stress fiber formation; transforming growth factor beta receptor signaling pathway |
| NCBI Summary: | Integrins are heterodimeric proteins made up of alpha and beta subunits. At least 18 alpha and 8 beta subunits have been described in mammals. Integrin family members are membrane receptors involved in cell adhesion and recognition in a variety of processes including embryogenesis, hemostasis, tissue repair, immune response and metastatic diffusion of tumor cells. This gene encodes a beta subunit. Multiple alternatively spliced transcript variants which encode different protein isoforms have been found for this gene. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P05556 |
| NCBI GenInfo Identifier: | 218563324 |
| NCBI Gene ID: | 3688 |
| NCBI Accession: | P05556.2 |
| UniProt Secondary Accession: | P05556,P78466, P78467, Q13089, Q13090, Q13091, Q13212 A8K6N2, D3DRX9, D3DRY3, D3DRY4, D3DRY5, |
| UniProt Related Accession: | P05556 |
| Molecular Weight: | 88,884 Da |
| NCBI Full Name: | Integrin beta-1 |
| NCBI Synonym Full Names: | integrin subunit beta 1 |
| NCBI Official Symbol: | ITGB1 |
| NCBI Official Synonym Symbols: | CD29; FNRB; MDF2; VLAB; GPIIA; MSK12; VLA-BETA |
| NCBI Protein Information: | integrin beta-1 |
| UniProt Protein Name: | Integrin beta-1 |
| UniProt Synonym Protein Names: | Fibronectin receptor subunit beta; Glycoprotein IIa; GPIIA; VLA-4 subunit beta; CD_antigen: CD29 |
| UniProt Gene Name: | ITGB1 |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Fill out our quote form below and a dedicated member of staff will get back to you within one working day!
Related Products
Human Integrin beta-2 ELISA Kit
