Human Cell Biology ELISA Kits 3
Human IL-7 CLIA Kit (HUES00428)
- SKU:
- HUES00428
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 4.69pg/mL
- Range:
- 7.81-500pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- IL7
- Reactivity:
- Human
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cell Biology
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Human |
| Detection method: | Chemiluminescence |
| Detection range: | 7.81-500 pg/mL |
| Sensitivity: | 4.69 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Human IL7 CLIA Kit in samples. No significant cross-reactivity or interference between Human IL7 CLIA Kit and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Human IL7. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human IL7 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human IL7, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Human IL7. The concentration of Human IL7 in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | IL7: Hematopoietic growth factor capable of stimulating the proliferation of lymphoid progenitors. It is important for proliferation during certain stages of B-cell maturation. Belongs to the IL-7/IL-9 family. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Apoptosis; Secreted, signal peptide; Cell development/differentiation; Cytokine; Secreted; Cell cycle regulation Chromosomal Location of Human Ortholog: 8q12-q13 Cellular Component: extracellular space; extracellular region Molecular Function:interleukin-7 receptor binding; protein binding; growth factor activity; cytokine activity Biological Process: positive regulation of organ growth; humoral immune response; T cell lineage commitment; organ morphogenesis; positive regulation of T cell differentiation; cell-cell signaling; regulation of gene expression; homeostasis of number of cells within a tissue; negative regulation of catalytic activity; positive regulation of cell proliferation; positive regulation of B cell proliferation; negative regulation of apoptosis; bone resorption |
| NCBI Summary: | The protein encoded by this gene is a cytokine important for B and T cell development. This cytokine and the hepatocyte growth factor (HGF) form a heterodimer that functions as a pre-pro-B cell growth-stimulating factor. This cytokine is found to be a cofactor for V(D)J rearrangement of the T cell receptor beta (TCRB) during early T cell development. This cytokine can be produced locally by intestinal epithelial and epithelial goblet cells, and may serve as a regulatory factor for intestinal mucosal lymphocytes. Knockout studies in mice suggested that this cytokine plays an essential role in lymphoid cell survival. Alternative splicing results in multiple transcript variants encoding distinct isoforms. Additional splice variants have been described but their presence in normal tissues has not been confirmed. [provided by RefSeq, Dec 2010] |
| UniProt Code: | P13232 |
| NCBI GenInfo Identifier: | 124354 |
| NCBI Gene ID: | 3574 |
| NCBI Accession: | P13232. 1 |
| UniProt Secondary Accession: | P13232,Q5FBY5, Q5FBY9, A0N0L3, |
| UniProt Related Accession: | P13232 |
| Molecular Weight: | 177 |
| NCBI Full Name: | Interleukin-7 |
| NCBI Synonym Full Names: | interleukin 7 |
| NCBI Official Symbol: | IL7 |
| NCBI Official Synonym Symbols: | IL-7 |
| NCBI Protein Information: | interleukin-7 |
| UniProt Protein Name: | Interleukin-7 |
| Protein Family: | Interleukin |
| UniProt Gene Name: | IL7 |
| UniProt Entry Name: | IL7_HUMAN |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 500 | 49957 53117 | 51537 | 51508 |
| 250 | 19841 22155 | 20998 | 20969 |
| 125 | 9857 8935 | 9396 | 9367 |
| 62.5 | 4277 4747 | 4512 | 4483 |
| 31.25 | 2403 2195 | 2299 | 2270 |
| 15.63 | 1285 1215 | 1250 | 1221 |
| 7.81 | 735 745 | 740 | 711 |
| 0 | 29 29 | 29 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human IL7 CLIA Kit were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human IL7 CLIA Kit were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 26.91 | 48.51 | 179.67 | 28.32 | 50.41 | 182.64 |
| Standard deviation | 3.09 | 5.72 | 10.96 | 3.45 | 6.00 | 15.93 |
| C V (%) | 11.48 | 11.79 | 6.10 | 12.18 | 11.90 | 8.72 |
Recovery
The recovery of Human IL7 CLIA Kit spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 91-107 | 98 |
| EDTA plasma (n=5) | 89-103 | 95 |
| Cell culture media (n=5) | 90-101 | 96 |
Linearity
Samples were spiked with high concentrations of Human IL7 CLIA Kit and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 85-101 | 89-104 | 102-116 |
| Average (%) | 92 | 96 | 110 | |
| 1:4 | Range (%) | 93-108 | 91-105 | 89-104 |
| Average (%) | 100 | 98 | 96 | |
| 1:8 | Range (%) | 97-108 | 99-112 | 86-98 |
| Average (%) | 102 | 105 | 91 | |
| 1:16 | Range (%) | 101-112 | 88-104 | 92-107 |
| Average (%) | 106 | 95 | 100 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
