Product Name:	Human AURKA(Aurora kinase A) ELISA Kit
Product Code:	HUFI03140
Size:	96 Assays
Alias:	AIK, ARK 1, ARK1, AURA, AURKA, aurora kinase A, Aurora related kinase 1, Aurora, IPL1 related kinase 1, AURORA2, Breast tumor amplified kinase, BTAK, hARK1, STK15, STK6, STK7
Detection method:	Sandwich ELISA, Double Antibody
Application:	This immunoassay kit allows for the in vitro quantitative determination of Human AURKA concentrations in serum plasma and other biological fluids.
Sensitivity:	0.188ng/ml
Range:	0.313-20ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:	Matrices listed below were spiked with certain level of Human AURKA and the recovery rates were calculated by comparing the measured value to the expected amount of Human AURKA in samples. Enquire for more information.
Linearity:	The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human AURKA and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information.
CV(%):	Intra-Assay: CV<8% Inter-Assay: CV<10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8×12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

O14965

UniProt Protein Function:	AurA: a member of the AUR family of kinases. A cell cycle-regulated serine/threonine protein kinase that is overexpressed in many tumor cell lines. Regulated by phosphorylation-dependent proteasomal degradation. Localized to mitotic centrosomes and spindle microtubules and is required for centrosome maturation. Loss of Aurora A leads to defective mitotic spindles and gross errors in chromosome segregation. Required for centrosome duplication and chromosome segregation. Overexpression in culture drives transformation and aneuploidy, and negatively regulates p53. Amplified or overexpressed in many tumors or cell lines. Found as a skin tumor susceptibility gene in mouse, and a human SNP in a degradation domain is weakly cancer-associated and undergoes allele-specific amplification. Inhibitors: VX-680, ZM447439, Hesperadin, SNS-595.
UniProt Protein Details:	Protein type:Protein kinase, Other; Protein kinase, Ser/Thr (non-receptor); EC 2.7.11.1; Oncoprotein; Kinase, protein; Other group; AUR family Chromosomal Location of Human Ortholog: 20q13 Cellular Component: microtubule cytoskeleton; germinal vesicle; axon hillock; centrosome; pronucleus; spindle microtubule; perinuclear region of cytoplasm; spindle; midbody; spindle midzone; spindle pole centrosome; cytosol; nucleus; condensed nuclear chromosome, pericentric region Molecular Function:protein serine/threonine kinase activity; protein binding; ubiquitin protein ligase binding; protein serine/threonine/tyrosine kinase activity; histone serine kinase activity; protein kinase binding; ATP binding; protein kinase activity Biological Process: spindle stabilization; mitosis; regulation of centrosome cycle; positive regulation of mitosis; protein amino acid autophosphorylation; regulation of protein stability; regulation of cytokinesis; protein amino acid phosphorylation; mitotic centrosome separation; mitotic spindle organization and biogenesis; centrosome localization; anaphase-promoting complex-dependent proteasomal ubiquitin-dependent protein catabolic process; cell division; positive regulation of proteasomal ubiquitin-dependent protein catabolic process; mitotic cell cycle; G2/M transition of mitotic cell cycle; negative regulation of protein binding; spindle assembly involved in female meiosis I; negative regulation of apoptosis; anterior/posterior axis specification Disease: Colorectal Cancer
NCBI Summary:	The protein encoded by this gene is a cell cycle-regulated kinase that appears to be involved in microtubule formation and/or stabilization at the spindle pole during chromosome segregation. The encoded protein is found at the centrosome in interphase cells and at the spindle poles in mitosis. This gene may play a role in tumor development and progression. A processed pseudogene of this gene has been found on chromosome 1, and an unprocessed pseudogene has been found on chromosome 10. Multiple transcript variants encoding the same protein have been found for this gene. [provided by RefSeq, Jul 2008]
UniProt Code:	O14965
NCBI GenInfo Identifier:	27923855
NCBI Gene ID:	6790
NCBI Accession:	O14965.2
UniProt Secondary Accession:	O14965,O60445, O75873, Q9BQD6, Q9UPG5, E1P5F9,
UniProt Related Accession:	O14965
Molecular Weight:	403
NCBI Full Name:	Aurora kinase A
NCBI Synonym Full Names:	aurora kinase A
NCBI Official Symbol:	AURKA
NCBI Official Synonym Symbols:	AIK; ARK1; AURA; BTAK; STK6; STK7; STK15; AURORA2; PPP1R47
NCBI Protein Information:	aurora kinase A; ARK-1; hARK1; aurora 2; Aurora-A kinase; IPL1-related kinase; aurora-related kinase 1; aurora/IPL1-like kinase; serine/threonine kinase 6; aurora/IPL1-related kinase 1; breast tumor-amplified kinase; breast-tumor-amplified kinase; serine/threonine-protein kinase 6; serine/threonine protein kinase 15; serine/threonine-protein kinase 15; serine/threonine-protein kinase aurora-A; protein phosphatase 1, regulatory subunit 47
UniProt Protein Name:	Aurora kinase A
UniProt Synonym Protein Names:	Aurora 2; Aurora/IPL1-related kinase 1; ARK-1; Aurora-related kinase 1; hARK1; Breast tumor-amplified kinase; Serine/threonine-protein kinase 15; Serine/threonine-protein kinase 6; Serine/threonine-protein kinase aurora-A
Protein Family:	Aurora kinase
UniProt Gene Name:	AURKA
UniProt Entry Name:	AURKA_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step	Protocol
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.