Product Name:	Human Alpha-synuclein ELISA Kit
Product Code:	HUFI00423
Size:	96 Assays
Alias:	SNCA, NACP, PARK1, PARK4, PD1, SNCA, Lewy body 4, non A-beta component of AD amyloid, Non-A beta component of AD amyloid, non-A4 component of amyloid, Non-A4 component of amyloid precursor, PARK1, PARK4, synuclein, alpha, non A4 component of amyloid precursor, Synuclein-alpha
Detection method:	Sandwich ELISA, Double Antibody
Application:	This immunoassay kit allows for the in vitro quantitative determination of Human SNCA concentrations in serum plasma and other biological fluids.
Sensitivity:	9.375pg/ml
Range:	15.625-1000pg/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Human SNCA and the recovery rates were calculated by comparing the measured value to the expected amount of Human SNCA in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	88-101	95
EDTA plasma(n=5)	93-104	98
UFH plasma(n=5)	85-98	91

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human SNCA and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	86-102%	85-101%	88-102%
EDTA plasma(n=5)	87-94%	90-100%	83-100%
UFH plasma(n=5)	81-99%	85-99%	85-97%

CV(%):

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8×12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

P37840

UniProt Protein Function:	SNCA: a member of the synuclein family. Abundantly expressed in the brain. Inhibits phospholipase D2 selectively. May integrate presynaptic signaling and membrane trafficking. Implicated in the pathogenesis of Parkinson's disease. A major component of amyloid plaques in the brains of patients with Alzheimer's disease. Two alternatively spliced isoforms transcripts have been identified.
UniProt Protein Details:	Protein type:Adaptor/scaffold Chromosomal Location of Human Ortholog: 4q21 Cellular Component: Golgi apparatus; nuclear outer membrane; mitochondrion; rough endoplasmic reticulum; lysosome; extracellular region; fibril; terminal button; inclusion body; cell cortex; mitochondrial respiratory chain complex I; cytosol; actin cytoskeleton; synaptic vesicle; platelet alpha granule membrane; growth cone; perinuclear region of cytoplasm; axon; cytoplasm; plasma membrane; ribosome; cell junction; nucleus Molecular Function:protein domain specific binding; identical protein binding; histone binding; zinc ion binding; kinesin binding; ferrous iron binding; microtubule binding; caspase inhibitor activity; beta-tubulin binding; magnesium ion binding; phosphoprotein binding; protein N-terminus binding; oxidoreductase activity; Hsp70 protein binding; calcium ion binding; dynein binding; protein binding; copper ion binding; phospholipase binding; phospholipid binding; tau protein binding; fatty acid binding; alpha-tubulin binding Biological Process: regulation of long-term neuronal synaptic plasticity; negative regulation of serotonin uptake; regulation of acyl-CoA biosynthetic process; adult locomotory behavior; positive regulation of apoptosis; negative regulation of norepinephrine uptake; mitochondrial membrane organization and biogenesis; microglial cell activation; response to lipopolysaccharide; positive regulation of endocytosis; dopamine biosynthetic process; negative regulation of transcription from RNA polymerase II promoter; negative regulation of caspase activity; negative regulation of monooxygenase activity; fatty acid metabolic process; positive regulation of neurotransmitter secretion; regulation of dopamine secretion; negative regulation of dopamine uptake; negative regulation of histone acetylation; calcium ion homeostasis; negative regulation of exocytosis; response to magnesium ion; negative regulation of protein amino acid phosphorylation; behavioral response to cocaine; receptor internalization; phospholipid metabolic process; fibril organization and biogenesis; synapse organization and biogenesis; dopamine uptake; negative regulation of neuron apoptosis; response to iron(II) ion; positive regulation of receptor recycling; aging; caspase activation; response to drug; neutral lipid metabolic process; protein destabilization; regulation of macrophage activation; regulation of glutamate secretion; negative regulation of microtubule polymerization; positive regulation of peptidyl-serine phosphorylation; negative regulation of dopamine metabolic process; organelle ATP synthesis coupled electron transport; regulation of locomotion; synaptic vesicle endocytosis; positive regulation of release of sequestered calcium ion into cytosol; regulation of excitatory postsynaptic membrane potential; negative regulation of transporter activity; negative regulation of apoptosis Disease: Parkinson Disease 4, Autosomal Dominant; Dementia, Lewy Body; Parkinson Disease 1, Autosomal Dominant
NCBI Summary:	Alpha-synuclein is a member of the synuclein family, which also includes beta- and gamma-synuclein. Synucleins are abundantly expressed in the brain and alpha- and beta-synuclein inhibit phospholipase D2 selectively. SNCA may serve to integrate presynaptic signaling and membrane trafficking. Defects in SNCA have been implicated in the pathogenesis of Parkinson disease. SNCA peptides are a major component of amyloid plaques in the brains of patients with Alzheimer's disease. Four alternatively spliced transcripts encoding two different isoforms have been identified for this gene. [provided by RefSeq, Mar 2009]
UniProt Code:	P37840
NCBI GenInfo Identifier:	586067
NCBI Gene ID:	6622
NCBI Accession:	P37840.1
UniProt Secondary Accession:	P37840,Q13701, Q4JHI3, Q6IAU6, A8K2A4,
UniProt Related Accession:	P37840
Molecular Weight:	140
NCBI Full Name:	Alpha-synuclein
NCBI Synonym Full Names:	synuclein, alpha (non A4 component of amyloid precursor)
NCBI Official Symbol:	SNCA
NCBI Official Synonym Symbols:	PD1; NACP; PARK1; PARK4
NCBI Protein Information:	alpha-synuclein; synuclein alpha-140; non A-beta component of AD amyloid
UniProt Protein Name:	Alpha-synuclein
UniProt Synonym Protein Names:	Non-A beta component of AD amyloid; Non-A4 component of amyloid precursor; NACP
Protein Family:	Alpha-synuclein
UniProt Gene Name:	SNCA
UniProt Entry Name:	SYUA_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step	Protocol
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.